build: Bump github/codeql-action/analyze from 4.36.2 to 4.38.1

[dependabot]

Bumps github/codeql-action/analyze from 4.36.2 to 4.38.1.

Release notes

Sourced from github/codeql-action/analyze's releases.

v4.38.1

• The CodeQL Action now has experimental support for CodeQL releases for which per-language bundles are available. Per-language bundles support analysis for a single language and are therefore smaller than the combined bundles that allow analysis for all supported languages. As a result, per-language bundles take up less space on disk and are faster to download. We expect to roll this change out to everyone in the coming weeks. #4146

v4.38.0

• On GitHub-hosted runners, the CodeQL Action now deletes unused CodeQL bundles from the toolcache before downloading a different bundle, which frees up disk space for the analysis. We expect to roll this change out to everyone in September. #4124
• The CodeQL Action now supports CodeQL releases that are compatible with Linux Arm64 and downloads the native linux-arm64 CodeQL bundle when available. #4072
• Update default CodeQL bundle version to 2.27.0. #4129

v4.37.9

• Update default CodeQL bundle version to 2.26.4. #4106

v4.37.8

No user facing changes.

v4.37.7

• Update default CodeQL bundle version to 2.26.3. #4085

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

v4.37.3

No user facing changes.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

v4.37.0

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

v4.36.3

No user facing changes.

Changelog

Sourced from github/codeql-action/analyze's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.38.1 - 18 Sept 2026

• The CodeQL Action now has experimental support for CodeQL releases for which per-language bundles are available. Per-language bundles support analysis for a single language and are therefore smaller than the combined bundles that allow analysis for all supported languages. As a result, per-language bundles take up less space on disk and are faster to download. We expect to roll this change out to everyone in the coming weeks. #4146

4.38.0 - 09 Sept 2026

• On GitHub-hosted runners, the CodeQL Action now deletes unused CodeQL bundles from the toolcache before downloading a different bundle, which frees up disk space for the analysis. We expect to roll this change out to everyone in September. #4124
• The CodeQL Action now supports CodeQL releases that are compatible with Linux Arm64 and downloads the native linux-arm64 CodeQL bundle when available. #4072
• Update default CodeQL bundle version to 2.27.0. #4129

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023

... (truncated)

Commits

• 1c5b675 Merge pull request #4152 from github/update-v4.38.1-a65b83a73
• a97cdca Add changelog entry for #4146
• cc6c691 Update changelog for v4.38.1
• a65b83a Merge pull request #4146 from github/henrymercer/per-language-bundles-pr
• 07fa87d Clarify the latest-nightly eligibility exception
• f18f353 Describe the bundle URL resolver
• ecec9b5 Share per-language telemetry fields without renaming
• 79fe3a1 Move download telemetry into the status-report directory
• ead1f7d Rename the platform module
• 549d498 Simplify per-language platform eligibility checks
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[coderabbitai]

Important

Review skipped

Auto reviews are disabled on this repository. Please check the settings in the CodeRabbit UI or the .coderabbit.yaml file in this repository. To trigger a single review, invoke the @coderabbitai review command.

⚙️ Run configuration

Configuration used: Repository: OSLC/oslc4net/.coderabbit.yaml

Review profile: CHILL

Plan: Advanced

Run ID: a48679e4-01b7-42f6-b65e-af30bbb40bf5

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

Use the checkbox below for a quick retry:

• 🔍 Trigger review

---

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

• X
• Mastodon
• Reddit
• LinkedIn

_{Comment @coderabbitai help to get the list of available commands.}

[codacy-production]

Up to standards ✅

🟢 Issues 0 issues

Results:
0 new issues

View in Codacy

AI Reviewer: first review requested successfully. AI can make mistakes. Always validate suggestions.

_{TIP This summary will be updated as you push new changes.}

[codacy-production]

Pull Request Overview

Although the PR is technically 'Up to Standards' according to automated quality checks, it introduces a major logic risk that should prevent merging in its current state. The update to the CodeQL action is partial, which will likely break the workflow due to version incompatibilities between the 'init', 'autobuild', and 'analyze' steps. These actions must be synchronized to the same version and commit hash to function correctly.

About this PR

• This PR performs a partial update of the CodeQL suite. CodeQL workflows consist of multiple steps (init, autobuild, and analyze) that must be kept on the same version to ensure internal compatibility. Updating only the 'analyze' step while leaving others on older versions is a known cause for runtime errors in GitHub Actions.

1 comment outside of the diff

[REDACTED:HIGH_ENTROPY]

_{line 91 🔴 HIGH RISK}
This update creates a version mismatch within the CodeQL workflow. The 'init', 'autobuild', and 'analyze' steps must be pinned to the same commit hash to ensure compatibility. Please ensure that all related CodeQL actions in this workflow file are updated to match this commit hash to prevent the workflow from failing during execution.

Test suggestions

• Verify the successful execution of the CodeQL analysis workflow with the new version.

Prompt proposal for missing tests

Consider implementing these tests if applicable:
1. Verify the successful execution of the CodeQL analysis workflow with the new version.

_{TIP Improve review quality by adding custom instructions
TIP How was this review? Give us feedback}