You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Since there is an invite by the InChI project to probe the revised processing of atropisomers, I drew this site's entry 93, M-Binol, on the project's test page editor from scratch:
By click on the molecule editor's floppy disk icon, I'm able to to collect an Extended SMILES string reading
When I paste this string into the the demo page of CDK Depict, the result
appears to be unable to add a CIP label - maybe $P, M, \Lambda{}, \Delta{}$ is beyond the intended / requested scope here
more importantly: the depiction is puzzling because i) solid wedges are substituted by dashed wedges while ii) retaining the position and the orientation ("wide end" and "apex") of the wedges. On first sight I thought CDK Depict were to depict the enantiomer:
I'm not sure if this difference is due to CDK depict, or not; in part because the editor as used over on the InChI website (Ketcher version 3.17.0) equally exports the same string as Daylight SMILES.
Looks like a bug with the coordinates getting in the way and wiping out stereochemistry. We actually support the RDKit method so you can do it without coordinates:
Also note your input is wrong anyways as you have too many wedges... the sketcher doesn't understand what you have drawn and added an extra tetrahedral stereo which is wrong.
The issue you is you are mixing worldviews. SMILES encodes stereochemistry in it's notation and not the coordinates/display. However atropisomers are not possible in plain SMILES (or even CXSMILES). This will work if you use a MOLfile since stereochemistry there is always captured via the coordinates. CDK Depict supports MOLfile / SDFfiles and so I would recommend that if you have coordinates.
Coordinates are useful in CXSMILES but it does raise a problem. What if the coordinates disagree with what is captured. For example:
Are the coordinates or the main encoding to be trusted?
I will look at why the wedge gets flipped around and I think the fix that will reperceive stereochemistry if there is a wedge pointing to an atom which isn't known to be tetrahedral. Reperceiving stereochemistry is quite expensive so I'm not sure I will do it in the toolkit but perhaps the webapp should cross-check things.
The two solid wedges: The lesson is learned; for one, to use only one next to
the centre or the axis of chirality to be compatible with the software. Though,
on the other hand, multiple solid wedges on the same ring to visually highlight
the orientation it is a recurrent motif in textbooks/teaching, discussions,
publications (e.g.1,2,3,4,5,6) on atropisomerism (and even if there
is not, illustration of GR-4.3.6 in [Brecher2008]. But this second use is for a
visual.
Regarding coordinates: Reaching out for the extended SMILES instead of
Daylight SMILES was intentional because
they are mentioned in the RDKit Book(8) (not the cookbook) as accepted input
and output
Indeed, a Python script to RDKit (2026.9.1) can export this type of SMILES; run
on a .mol about methane to report C |(1.0723,-0.0225,-0.0653)|, and on VS057
of the CIP validation suite a
I think you didn't fully understand what I said. There is a slight bug but it does work with CXSMILES just not if you give it coordinates - that is what is confusing it.
Not deploy yet but we now attempt to synchronise information on inconsistent input.
Using the new warning/error handling red icon tells you are doing something odd.
If there is either no stereo provided in the coordinates, or none in the base input it presume the other is correct. In this case, removing the [C@] in the base SMILES means there is no warning.
Activity
johnmay commentedon Oct 17, 2026
Looks like a bug with the coordinates getting in the way and wiping out stereochemistry. We actually support the RDKit method so you can do it without coordinates:
The encoding is described in the RDKit book.
Also note your input is wrong anyways as you have too many wedges... the sketcher doesn't understand what you have drawn and added an extra tetrahedral stereo which is wrong.
johnmay commentedon Oct 17, 2026
The issue you is you are mixing worldviews. SMILES encodes stereochemistry in it's notation and not the coordinates/display. However atropisomers are not possible in plain SMILES (or even CXSMILES). This will work if you use a MOLfile since stereochemistry there is always captured via the coordinates. CDK Depict supports MOLfile / SDFfiles and so I would recommend that if you have coordinates.
Coordinates are useful in CXSMILES but it does raise a problem. What if the coordinates disagree with what is captured. For example:
Gives the little odd:
Are the coordinates or the main encoding to be trusted?
I will look at why the wedge gets flipped around and I think the fix that will reperceive stereochemistry if there is a wedge pointing to an atom which isn't known to be tetrahedral. Reperceiving stereochemistry is quite expensive so I'm not sure I will do it in the toolkit but perhaps the webapp should cross-check things.
nbehrnd commentedon Oct 21, 2026
The two solid wedges: The lesson is learned; for one, to use only one next to
the centre or the axis of chirality to be compatible with the software. Though,
on the other hand, multiple solid wedges on the same ring to visually highlight
the orientation it is a recurrent motif in textbooks/teaching, discussions,
publications (e.g.1,2,3,4,5,6) on atropisomerism (and even if there
is not, illustration of GR-4.3.6 in [Brecher2008]. But this second use is for a
visual.
Regarding coordinates: Reaching out for the extended SMILES instead of
Daylight SMILES was intentional because
and output
Indeed, a Python script to RDKit (2026.9.1) can export this type of SMILES; run
on a .mol about methane to report
C |(1.0723,-0.0225,-0.0653)|, and on VS057of the CIP validation suite a
which basically relies on
The 3D .sdf from the site is processed by CDK depict including an assigned M; at
present, this is not possible with the extended SMILES.
2026-10-21_data.zip
johnmay commentedon Oct 21, 2026
I think you didn't fully understand what I said. There is a slight bug but it does work with CXSMILES just not if you give it coordinates - that is what is confusing it.
johnmay commentedon Oct 21, 2026
Also responding here as nothing to do with InChI but you can give CDK depict an SDF file to display multiple MOLfiles.
johnmay commentedon Nov 10, 2026
Not deploy yet but we now attempt to synchronise information on inconsistent input.
Using the new warning/error handling red icon tells you are doing something odd.
If there is either no stereo provided in the coordinates, or none in the base input it presume the other is correct. In this case, removing the
[C@]in the base SMILES means there is no warning.