Skip to content

feat: IPv6 link-local/scope ID/solicited-node multicast (roadmap task 5) - #54

Merged
gspivey merged 2 commits into
developmentfrom
agent/ipv6-link-local-scope
May 19, 2026
Merged

gspivey merged 2 commits into
developmentfrom
agent/ipv6-link-local-scope

Conversation

@gspivey

@gspivey gspivey commented May 19, 2026

Copy link
Copy Markdown
Owner

Roadmap Item

IPv6 task 5: link-local address detection, scope ID parsing, solicited-node multicast MAC derivation.

What This Module Provides

  • fe80::/10 link-local detection — is_link_local() identifies addresses in the link-local prefix range
  • %ifindex scope ID parsing — parses IPv6 addresses with zone IDs (e.g., fe80::1%eth0), extracting both the address and scope identifier
  • 33:33:ff:XX:XX:XX solicited-node multicast MAC derivation — computes the Ethernet multicast MAC from the low 24 bits of the target IPv6 address, per RFC 4291 §2.7.1

Test Coverage

  • 25 new unit tests covering all three capabilities (link-local detection, scope parsing, solicited-node MAC)
  • 455 total tests passing across the workspace

Notes

  • This is a prerequisite for IPv6 task 6 (NDP — Neighbor Discovery Protocol)
  • Resumes work from a prior session that was blocked on PAT credentials (contents:write permission)

IPv6 roadmap task 5: link-local address detection, scope ID (%ifindex)
parsing, solicited-node multicast address derivation, and IPv6 multicast
MAC computation.

New module: dpdk-udp/src/ipv6_addr.rs with 25 tests including:
- is_link_local(): fe80::/10 detection with boundary tests
- parse_scoped_address(): %zone_id parsing (RFC 4007/6874)
- solicited_node_multicast_addr(): ff02::1:ffXX:XXXX derivation
- solicited_node_multicast_mac(): 33:33:ff:XX:XX:XX MAC derivation
- ipv6_multicast_mac(): generic IPv6 multicast MAC (RFC 2464 §7)
- Synthetic perf benchmarks for hot-path operations
@github-actions

Copy link
Copy Markdown

Synthetic Performance Results — Graviton (run)

Commit: 088847be

✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)

Synthetic UDP Performance Results

Measures framework overhead: sync dpdk_udp::UdpSocket vs async (std::sync::Mutex + try_recv_from).

Test Payload Sync PPS Async PPS Ratio (sync/async) Async ns/op
TX send_to 64B 11.4M 10.6M 1.1x 94
RX recv_from 64B 3.4M 4.6M 0.7x 218
TX send_to 1400B 1.6M 1.6M 1.0x 610
RX recv_from 1400B 1.0M 1.1M 0.9x 888

Avg sync/async ratio: 0.9x, worst: 1.1x

Good: Async wrapper is within 1.1x of sync — minimal framework overhead.

@github-actions

Copy link
Copy Markdown

Synthetic Performance Results (run)

Commit: 088847be

✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)

Synthetic UDP Performance Results

Measures framework overhead: sync dpdk_udp::UdpSocket vs async (std::sync::Mutex + try_recv_from).

Test Payload Sync PPS Async PPS Ratio (sync/async) Async ns/op
TX send_to 64B 11.8M 11.5M 1.0x 86
RX recv_from 64B 3.5M 4.9M 0.7x 205
TX send_to 1400B 1.9M 1.9M 1.0x 532
RX recv_from 1400B 1.1M 1.2M 0.9x 836

Avg sync/async ratio: 0.9x, worst: 1.0x

Good: Async wrapper is within 1.0x of sync — minimal framework overhead.

@github-actions

Copy link
Copy Markdown

[CI] Stage: Deploy

Infrastructure ready.

  • Sender: i-0bb49f3c60cf93e2d (DPDK ENI: 10.0.1.141)
  • Receiver: i-092f198d086205bad (DPDK ENI: 10.0.1.172)
  • Both instances SSM-ready.

@github-actions

Copy link
Copy Markdown

[CI] Stage: Deploy

Infrastructure ready.

  • Sender: i-0c864b880e3e46e91 (DPDK ENI: 10.0.1.142)
  • Receiver: i-08040d0a0a09e009e (DPDK ENI: 10.0.1.160)
  • Both instances SSM-ready.

@github-actions

Copy link
Copy Markdown

[CI] Stage: Summary

All tests PASSED.

ARP seeding: kernel /proc/net/arp (automatic)

  • tier1-dpdk-echo: 6 tests, 0 failures
  • tier2-kernel-interop: 4 tests, 0 failures
  • tier3-iperf-interop: 1 tests, 0 failures
  • tier3-iperf-interop: 1 tests, 0 failures

@github-actions

Copy link
Copy Markdown

✅ Integration Tests Passed — Graviton (run)

Branch: 54/merge | Commit: 088847be

Test Results

  • tier1-dpdk-echo.xml: 6 tests, 0 failures
  • tier2-kernel-interop.xml: 4 tests, 0 failures
  • tier3-iperf-sends.xml: 1 tests, 0 failures
  • tier3-our-app-sends.xml: 1 tests, 0 failures

Application Logs (last 20 lines)

receiver-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.172:9000 (MAC: 02:83:44:51:0e:69)
echo listening on 10.0.1.172:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.141:9000 (MAC: 02:80:53:4f:4e:6f)
echo listening on 10.0.1.141:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-test-client.log

EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
TELEMETRY: No legacy callbacks, legacy socket not created
DPDK bind failed (Port init failed: Invalid port ID: 0), falling back to tokio
Backend: tokio
Sending packets...
Sent 12 bytes: 'arp-probe #1'
Received 12 bytes from 10.0.1.172:9000: 'arp-probe #1'
Test complete
[2026-05-19T06:15:15Z] INFO: ARP resolution succeeded (got response from peer)
[2026-05-19T06:15:15Z] INFO: Test: udp_send_receive
[2026-05-19T06:15:16Z] INFO: UDP send/receive succeeded
[2026-05-19T06:15:17Z] INFO: Test: echo_roundtrip
[2026-05-19T06:15:17Z] INFO: Echo roundtrip succeeded: 5/5 responses received
[2026-05-19T06:15:17Z] INFO: Test: payload_integrity
[2026-05-19T06:15:17Z] INFO: Response received, checking payload match...
[2026-05-19T06:15:17Z] INFO: Payload integrity verified (found in response)
[2026-05-19T06:15:17Z] INFO: JUnit XML written to: /tmp/test-results/tier2-kernel-interop.xml
[2026-05-19T06:15:17Z] INFO: Tier 2 sender tests complete. Results: /tmp/test-results/tier2-kernel-interop.xml

@github-actions

Copy link
Copy Markdown

[CI] Stage: Summary

All tests PASSED.

ARP seeding: kernel /proc/net/arp (automatic)

  • tier1-dpdk-echo: 6 tests, 0 failures
  • tier2-kernel-interop: 4 tests, 0 failures
  • tier3-iperf-interop: 1 tests, 0 failures
  • tier3-iperf-interop: 1 tests, 0 failures

@github-actions

Copy link
Copy Markdown

✅ Integration Tests Passed (Run 26078735084)

Branch: 54/merge | Commit: 088847be

Test Results

  • tier1-dpdk-echo.xml: 6 tests, 0 failures, skipped
  • tier2-kernel-interop.xml: 4 tests, 0 failures, skipped
  • tier3-iperf-sends.xml: 1 tests, 0 failures, skipped
  • tier3-our-app-sends.xml: 1 tests, 0 failures, skipped

Application Logs (last 20 lines)

receiver-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.160:9000 (MAC: 02:1f:31:80:4f:f1)
echo listening on 10.0.1.160:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.142:9000 (MAC: 02:90:b3:ea:df:2d)
echo listening on 10.0.1.142:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-test-client.log

EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
TELEMETRY: No legacy callbacks, legacy socket not created
DPDK bind failed (Port init failed: Invalid port ID: 0), falling back to tokio
Backend: tokio
Sending packets...
Sent 12 bytes: 'arp-probe #1'
Received 12 bytes from 10.0.1.160:9000: 'arp-probe #1'
Test complete
[2026-05-19T06:18:17Z] INFO: ARP resolution succeeded (got response from peer)
[2026-05-19T06:18:17Z] INFO: Test: udp_send_receive
[2026-05-19T06:18:18Z] INFO: UDP send/receive succeeded
[2026-05-19T06:18:18Z] INFO: Test: echo_roundtrip
[2026-05-19T06:18:19Z] INFO: Echo roundtrip succeeded: 5/5 responses received
[2026-05-19T06:18:19Z] INFO: Test: payload_integrity
[2026-05-19T06:18:19Z] INFO: Response received, checking payload match...
[2026-05-19T06:18:19Z] INFO: Payload integrity verified (found in response)
[2026-05-19T06:18:19Z] INFO: JUnit XML written to: /tmp/test-results/tier2-kernel-interop.xml
[2026-05-19T06:18:19Z] INFO: Tier 2 sender tests complete. Results: /tmp/test-results/tier2-kernel-interop.xml

receiver-test-client-iperf.log

[2026-05-19T06:25:38Z] INFO: iperf-sends: sent 10 packets, received 10 responses
[2026-05-19T06:25:38Z] INFO: iperf-sends: PASS (sent >= 5 packets)
[2026-05-19T06:25:38Z] INFO: JUnit XML written to: /tmp/test-results/tier3-iperf-sends.xml
[2026-05-19T06:25:38Z] INFO: iperf-sends test complete

sender-test-client-iperf.log

Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #3'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #4'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #4'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #5'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #5'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #6'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #6'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #7'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #7'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #8'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #8'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #9'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #9'
Sent 31 bytes: 'dpdk-to-kernel-test-payload #10'
Received 31 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #10'
Test complete
[2026-05-19T06:24:38Z] INFO: our-app-sends: sent 10 packets, received 10 responses
[2026-05-19T06:24:38Z] INFO: our-app-sends: PASS (sent >= 5 packets)
[2026-05-19T06:24:38Z] INFO: JUnit XML written to: /tmp/test-results/tier3-our-app-sends.xml
[2026-05-19T06:24:38Z] INFO: our-app-sends test complete
Full Application Logs (last 200 lines each)

receiver-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.160:9000 (MAC: 02:1f:31:80:4f:f1)
echo listening on 10.0.1.160:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.142:9000 (MAC: 02:90:b3:ea:df:2d)
echo listening on 10.0.1.142:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-test-client.log

[2026-05-19T06:13:36Z] INFO: Test: arp_resolution
UDP Test Client
Target: 10.0.1.160:9000
Bind address: 10.0.1.142:0
Message: 'arp-probe'
Count: 1
EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.142:32768 (MAC: 02:90:b3:ea:df:2d)
Backend: dpdk
Sending packets...
Sent 12 bytes: 'arp-probe #1'
Received 12 bytes from 10.0.1.160:9000: 'arp-probe #1'
Test complete
[2026-05-19T06:13:38Z] INFO: ARP resolution succeeded (got response from peer)
[2026-05-19T06:13:38Z] INFO: Test: udp_send_receive
[2026-05-19T06:13:40Z] INFO: UDP send/receive succeeded
[2026-05-19T06:13:40Z] INFO: Test: echo_roundtrip
[2026-05-19T06:13:41Z] INFO: Echo roundtrip succeeded: 5/5 responses received
[2026-05-19T06:13:41Z] INFO: Test: payload_integrity
[2026-05-19T06:13:42Z] INFO: Response received, checking payload match...
[2026-05-19T06:13:42Z] INFO: Payload integrity verified (found in response)
[2026-05-19T06:13:42Z] INFO: Test: jumbo_diagnostics
[2026-05-19T06:13:42Z] INFO: === JUMBO FRAME DIAGNOSTICS ===
[2026-05-19T06:13:42Z] INFO: Interface MTU:
  9001
  65536
[2026-05-19T06:13:42Z] INFO:   ens5: MTU=9001
[2026-05-19T06:13:42Z] INFO:   lo: MTU=65536
[2026-05-19T06:13:42Z] INFO: Routing table MTU column:
Iface	Destination	Gateway 	Flags	RefCnt	Use	Metric	Mask		MTU	Window	IRTT                                                       
ens5	00000000	0101000A	0003	0	0	512	00000000	0	0	0                                                                             
ens5	0200000A	0101000A	0007	0	0	512	FFFFFFFF	0	0	0                                                                             
ens5	0001000A	00000000	0001	0	0	512	00FFFFFF	0	0	0                                                                             
ens5	0101000A	00000000	0005	0	0	512	FFFFFFFF	0	0	0                                                                             
[2026-05-19T06:13:42Z] INFO: DPDK port config (from echo server log):
[2026-05-19T06:13:42Z] INFO:   (no MTU info in echo log)
[2026-05-19T06:13:42Z] INFO: === END JUMBO DIAGNOSTICS ===
[2026-05-19T06:13:42Z] INFO: Test: jumbo_echo_8000
[2026-05-19T06:13:44Z] INFO: Jumbo output: UDP Test Client
Target: 10.0.1.160:9000
Bind address: 10.0.1.142:0
Payload size: 8000 bytes
Count: 3
EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.142:32768 (MAC: 02:90:b3:ea:df:2d)
Backend: dpdk
Sending packets...
Sent 8000 bytes (binary payload)
Received 8000 bytes from 10.0.1.160:9000 (expected 8000, OK)
Sent 8000 bytes (binary payload)
Received 8000 bytes from 10.0.1.160:9000 (expected 8000, OK)
Sent 8000 bytes (binary payload)
Received 8000 bytes from 10.0.1.160:9000 (expected 8000, OK)
Test complete
[2026-05-19T06:13:44Z] INFO: Jumbo frame echo succeeded: 3/3 responses with correct size
[2026-05-19T06:13:44Z] INFO: JUnit XML written to: /tmp/test-results/tier1-dpdk-echo.xml
[2026-05-19T06:13:44Z] INFO: Tier 1 sender tests complete. Results: /tmp/test-results/tier1-dpdk-echo.xml
[2026-05-19T06:18:17Z] INFO: Test: arp_resolution
UDP Test Client
Target: 10.0.1.160:9000
Bind address: 0.0.0.0:0
Message: 'arp-probe'
Count: 1
EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
TELEMETRY: No legacy callbacks, legacy socket not created
DPDK bind failed (Port init failed: Invalid port ID: 0), falling back to tokio
Backend: tokio
Sending packets...
Sent 12 bytes: 'arp-probe #1'
Received 12 bytes from 10.0.1.160:9000: 'arp-probe #1'
Test complete
[2026-05-19T06:18:17Z] INFO: ARP resolution succeeded (got response from peer)
[2026-05-19T06:18:17Z] INFO: Test: udp_send_receive
[2026-05-19T06:18:18Z] INFO: UDP send/receive succeeded
[2026-05-19T06:18:18Z] INFO: Test: echo_roundtrip
[2026-05-19T06:18:19Z] INFO: Echo roundtrip succeeded: 5/5 responses received
[2026-05-19T06:18:19Z] INFO: Test: payload_integrity
[2026-05-19T06:18:19Z] INFO: Response received, checking payload match...
[2026-05-19T06:18:19Z] INFO: Payload integrity verified (found in response)
[2026-05-19T06:18:19Z] INFO: JUnit XML written to: /tmp/test-results/tier2-kernel-interop.xml
[2026-05-19T06:18:19Z] INFO: Tier 2 sender tests complete. Results: /tmp/test-results/tier2-kernel-interop.xml

receiver-test-client-iperf.log

[2026-05-19T06:25:38Z] INFO: iperf-sends: sent 10 packets, received 10 responses
[2026-05-19T06:25:38Z] INFO: iperf-sends: PASS (sent >= 5 packets)
[2026-05-19T06:25:38Z] INFO: JUnit XML written to: /tmp/test-results/tier3-iperf-sends.xml
[2026-05-19T06:25:38Z] INFO: iperf-sends test complete

sender-test-client-iperf.log

[2026-05-19T06:24:35Z] INFO: Pre-flight: checking DPDK state and ARP cache...
[2026-05-19T06:24:35Z] INFO: Local IP: 10.0.1.142, Peer IP: 10.0.1.160, Port: 9000
[2026-05-19T06:24:35Z] INFO: /proc/net/arp contents:
IP address       HW type     Flags       HW address            Mask     Device
10.0.1.160       0x1         0x2         02:1f:31:80:4f:f1     *        ens5
10.0.1.142       0x1         0x2         02:90:b3:ea:df:2d     *        ens5
10.0.1.190       0x1         0x2         02:e7:c7:e8:a0:6b     *        ens5
10.0.1.186       0x1         0x2         02:e1:32:62:af:95     *        ens5
10.0.1.1         0x1         0x2         02:e0:e6:ee:3f:5f     *        ens5
[2026-05-19T06:24:35Z] INFO: DPDK runtime state:
No /var/run/dpdk/ directory
[2026-05-19T06:24:35Z] INFO: vfio-pci bindings:
0000:00:06.0
bind
module
new_id
remove_id
uevent
unbind
[2026-05-19T06:24:35Z] INFO: Test binary: /opt/dpdk-stdlib/target/release/test-client
-rwxr-xr-x. 2 root root 1893896 May 19 06:11 /opt/dpdk-stdlib/target/release/test-client
[2026-05-19T06:24:35Z] INFO: Launching test-client: /opt/dpdk-stdlib/target/release/test-client --target 10.0.1.160 --port 9000 --bind-ip 10.0.1.142 --count 10 --delay 200
[2026-05-19T06:24:38Z] INFO: Test client output: UDP Test Client
Target: 10.0.1.160:9000
Bind address: 10.0.1.142:0
Message: 'dpdk-to-kernel-test-payload'
Count: 10
EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.142:32768 (MAC: 02:90:b3:ea:df:2d)
Backend: dpdk
Sending packets...
Sent 30 bytes: 'dpdk-to-kernel-test-payload #1'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #1'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #2'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #2'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #3'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #3'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #4'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #4'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #5'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #5'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #6'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #6'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #7'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #7'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #8'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #8'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #9'
Received 30 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #9'
Sent 31 bytes: 'dpdk-to-kernel-test-payload #10'
Received 31 bytes from 10.0.1.160:9000: 'dpdk-to-kernel-test-payload #10'
Test complete
[2026-05-19T06:24:38Z] INFO: our-app-sends: sent 10 packets, received 10 responses
[2026-05-19T06:24:38Z] INFO: our-app-sends: PASS (sent >= 5 packets)
[2026-05-19T06:24:38Z] INFO: JUnit XML written to: /tmp/test-results/tier3-our-app-sends.xml
[2026-05-19T06:24:38Z] INFO: our-app-sends test complete
⚠️ SSM Command Failures (receiver-ssm-failure.log)
=== Polling timeout after 30s ===
Status: InProgress
Instance: i-08040d0a0a09e009e (receiver)
Command ID: bd75cbfd-e6b0-4bc4-acfd-200e19163637

=== STDOUT ===


=== STDERR ===


=== Polling timeout after 30s ===
Status: InProgress
Instance: i-08040d0a0a09e009e (receiver)
Command ID: bec7ed31-31cb-4644-a4df-682786bab784

=== STDOUT ===


=== STDERR ===


=== Polling timeout after 30s ===
Status: InProgress
Instance: i-08040d0a0a09e009e (receiver)
Command ID: b909b4d2-11e8-426c-be6d-6d06ef20053d

=== STDOUT ===


=== STDERR ===


=== Polling timeout after 30s ===
Status: InProgress
Instance: i-08040d0a0a09e009e (receiver)
Command ID: 3d4d71f5-e2f5-4d1d-a573-e923c0860289

=== STDOUT ===


=== STDERR ===


⚠️ SSM Command Failures (sender-ssm-failure.log)
=== Polling timeout 120s (SSM timeout: 90s, command: cd /opt/dpdk-stdlib && bash scripts/integration-tests/configure-eni.sh --action unbind && bash scripts/integration-tests/configure-eni.sh --action assign-ip --ip 10.0.1.142) ===
Status: InProgress
Instance: i-0c864b880e3e46e91 (sender)
Command ID: 5dd8d277-b91e-4e46-b38c-d2d0fc9a14d6

=== STDOUT ===


=== STDERR ===


=== Polling timeout after 30s ===
Status: InProgress
Instance: i-0c864b880e3e46e91 (sender)
Command ID: 5c7033e3-358b-4da0-8d2c-1770782de414

=== STDOUT ===


=== STDERR ===


Network & PCI State

receiver-network-interfaces.log

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: ens5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9001 qdisc mq state UP group default qlen 1000
    link/ether 02:9d:f3:9e:12:bd brd ff:ff:ff:ff:ff:ff
    altname enp0s5
    altname eni-0e2f7a158be001a27
    altname device-number-0.0
    inet 10.0.1.243/24 metric 512 brd 10.0.1.255 scope global dynamic ens5
       valid_lft 2215sec preferred_lft 2215sec
    inet6 fe80::9d:f3ff:fe9e:12bd/64 scope link proto kernel_ll 
       valid_lft forever preferred_lft forever

sender-network-interfaces.log

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: ens5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9001 qdisc mq state UP group default qlen 1000
    link/ether 02:11:32:c7:3f:27 brd ff:ff:ff:ff:ff:ff
    altname enp0s5
    altname eni-06a92ae05f50d4521
    altname device-number-0.0
    inet 10.0.1.85/24 metric 512 brd 10.0.1.255 scope global dynamic ens5
       valid_lft 2238sec preferred_lft 2238sec
    inet6 fe80::11:32ff:fec7:3f27/64 scope link proto kernel_ll 
       valid_lft forever preferred_lft forever

receiver-networking-diag-baseline.txt

=== NETWORKING DIAGNOSTICS ===
timestamp: 2026-05-19T06:12:56Z
hostname: ip-10-0-1-243.ec2.internal
kernel: 6.18.25-57.109.amzn2023.x86_64

=== DPDK PORT STATUS ===

Network devices using DPDK-compatible driver
============================================
0000:00:06.0 'Elastic Network Adapter (ENA) ec20' drv=vfio-pci unused=ena

Network devices using kernel driver
===================================
0000:00:05.0 'Elastic Network Adapter (ENA) ec20' if=ens5 drv=ena unused=vfio-pci *Active*

No 'Baseband' devices detected
==============================

No 'Crypto' devices detected
============================

No 'DMA' devices detected
=========================

No 'Eventdev' devices detected
==============================

No 'Mempool' devices detected
=============================

No 'Compress' devices detected
==============================

No 'Misc (rawdev)' devices detected
===================================

No 'Regex' devices detected
===========================

=== IP ADDRESSES ===
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: ens5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9001 qdisc mq state UP group default qlen 1000
    link/ether 02:9d:f3:9e:12:bd brd ff:ff:ff:ff:ff:ff
    altname enp0s5
    altname eni-0e2f7a158be001a27
    altname device-number-0.0
    inet 10.0.1.243/24 metric 512 brd 10.0.1.255 scope global dynamic ens5
       valid_lft 3285sec preferred_lft 3285sec
    inet6 fe80::9d:f3ff:fe9e:12bd/64 scope link proto kernel_ll 
       valid_lft forever preferred_lft forever

=== ARP TABLE ===
10.0.1.186 dev ens5 lladdr 02:e1:32:62:af:95 REACHABLE 
10.0.1.1 dev ens5 lladdr 02:e0:e6:ee:3f:5f REACHABLE 

=== ROUTE TABLE ===
default via 10.0.1.1 dev ens5 proto dhcp src 10.0.1.243 metric 512 
10.0.0.2 via 10.0.1.1 dev ens5 proto dhcp src 10.0.1.243 metric 512 
10.0.1.0/24 dev ens5 proto kernel scope link src 10.0.1.243 metric 512 
10.0.1.1 dev ens5 proto dhcp scope link src 10.0.1.243 metric 512 

=== IMDS: ENI INFORMATION ===
ENI MACs found: 02:1f:31:80:4f:f1/ 02:9d:f3:9e:12:bd/ 

--- ENI: 02:1f:31:80:4f:f1/ ---
  device-number: 1
  local-ipv4s: 10.0.1.160
  subnet-id: subnet-0d1f42074c0416ba4
  subnet-cidr: 10.0.1.0/24

--- ENI: 02:9d:f3:9e:12:bd/ ---
  device-number: 0
  local-ipv4s: 10.0.1.243
  subnet-id: subnet-0d1f42074c0416ba4
  subnet-cidr: 10.0.1.0/24


=== GATEWAY ARP TEST ===
Gateway IP: 10.0.1.1
Gateway ARP entry:
10.0.1.1 dev ens5 lladdr 02:e0:e6:ee:3f:5f REACHABLE 

arping result:
ARPING 10.0.1.1 from 10.0.1.243 ens5
Unicast reply from 10.0.1.1 [02:E0:E6:EE:3F:5F]  0.538ms
Sent 1 probes (1 broadcast(s))
Received 1 response(s)

=== HUGEPAGE STATUS ===
AnonHugePages:         0 kB
ShmemHugePages:        0 kB
FileHugePages:     18432 kB
HugePages_Total:    1024
HugePages_Free:     1024
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
Hugetlb:         2097152 kB

=== VFIO STATUS ===
total 0
drwxr-xr-x.  2 root root       80 May 19 06:12 .
drwxr-xr-x. 14 root root     3100 May 19 06:12 ..
crw-------.  1 root root 243,   0 May 19 06:12 noiommu-0
crw-rw-rw-.  1 root root  10, 196 May 19 06:07 vfio

noiommu mode:
Y

=== DPDK SHARED MEMORY ===
no /var/run/dpdk/ directory (clean state)

=== DPDK-RELATED DMESG (last 30 lines) ===
[    0.054246] printk: legacy console [ttyS0] enabled
[    0.055352] x2apic enabled
[    0.060044] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[    0.060159] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format.
[    0.069717] audit: type=2000 audit(1779170854.659:1): state=initialized audit_enabled=0 res=1
[    0.079172] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.129398] ACPI: Interpreter enabled
[    0.129522] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.149246] pci 0000:00:05.0: enabling Extended Tags
[    0.211591] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    0.219573] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[    0.225874] IPI shorthand broadcast: enabled
[    4.760288] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    4.794099] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    4.876746] VFIO - User Level meta-driver version: 0.3
[    5.405798] ena 0000:00:05.0: Elastic Network Adapter (ENA) v2.16.1g
[    5.415811] ena 0000:00:05.0: ENA device version: 0.10
[    5.416583] ena 0000:00:05.0: ENA controller version: 0.0.1 implementation version 1
[    5.534802] ena 0000:00:05.0: ENA Large LLQ is disabled
[    5.547101] ena 0000:00:05.0: Elastic Network Adapter (ENA) found at mem c0500000, mac addr 02:9d:f3:9e:12:bd
[    5.592866] ena 0000:00:05.0 ens5: renamed from eth0
[  270.708703] pci 0000:00:06.0: enabling Extended Tags
[  270.712834] ena 0000:00:06.0: enabling device (0000 -> 0002)
[  270.722293] ena 0000:00:06.0: ENA device version: 0.10
[  270.723035] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[  270.822267] ena 0000:00:06.0: ENA Large LLQ is disabled
[  270.834365] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:1f:31:80:4f:f1
[  270.842018] ena 0000:00:06.0 ens6: renamed from eth0
[  308.339501] vfio-pci 0000:00:06.0: Adding to iommu group 0
[  308.340912] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device

=== DPDK-RELATED PROCESSES ===
no DPDK processes running

=== END DIAGNOSTICS ===

sender-networking-diag-baseline.txt

=== NETWORKING DIAGNOSTICS ===
timestamp: 2026-05-19T06:12:48Z
hostname: ip-10-0-1-85.ec2.internal
kernel: 6.18.25-57.109.amzn2023.x86_64

=== DPDK PORT STATUS ===

Network devices using DPDK-compatible driver
============================================
0000:00:06.0 'Elastic Network Adapter (ENA) ec20' drv=vfio-pci unused=ena

Network devices using kernel driver
===================================
0000:00:05.0 'Elastic Network Adapter (ENA) ec20' if=ens5 drv=ena unused=vfio-pci *Active*

No 'Baseband' devices detected
==============================

No 'Crypto' devices detected
============================

No 'DMA' devices detected
=========================

No 'Eventdev' devices detected
==============================

No 'Mempool' devices detected
=============================

No 'Compress' devices detected
==============================

No 'Misc (rawdev)' devices detected
===================================

No 'Regex' devices detected
===========================

=== IP ADDRESSES ===
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: ens5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9001 qdisc mq state UP group default qlen 1000
    link/ether 02:11:32:c7:3f:27 brd ff:ff:ff:ff:ff:ff
    altname enp0s5
    altname eni-06a92ae05f50d4521
    altname device-number-0.0
    inet 10.0.1.85/24 metric 512 brd 10.0.1.255 scope global dynamic ens5
       valid_lft 3293sec preferred_lft 3293sec
    inet6 fe80::11:32ff:fec7:3f27/64 scope link proto kernel_ll 
       valid_lft forever preferred_lft forever

=== ARP TABLE ===
10.0.1.186 dev ens5 lladdr 02:e1:32:62:af:95 REACHABLE 
10.0.1.1 dev ens5 lladdr 02:e0:e6:ee:3f:5f REACHABLE 

=== ROUTE TABLE ===
default via 10.0.1.1 dev ens5 proto dhcp src 10.0.1.85 metric 512 
10.0.0.2 via 10.0.1.1 dev ens5 proto dhcp src 10.0.1.85 metric 512 
10.0.1.0/24 dev ens5 proto kernel scope link src 10.0.1.85 metric 512 
10.0.1.1 dev ens5 proto dhcp scope link src 10.0.1.85 metric 512 

=== IMDS: ENI INFORMATION ===
ENI MACs found: 02:11:32:c7:3f:27/ 02:90:b3:ea:df:2d/ 

--- ENI: 02:11:32:c7:3f:27/ ---
  device-number: 0
  local-ipv4s: 10.0.1.85
  subnet-id: subnet-0d1f42074c0416ba4
  subnet-cidr: 10.0.1.0/24

--- ENI: 02:90:b3:ea:df:2d/ ---
  device-number: 1
  local-ipv4s: 10.0.1.142
  subnet-id: subnet-0d1f42074c0416ba4
  subnet-cidr: 10.0.1.0/24


=== GATEWAY ARP TEST ===
Gateway IP: 10.0.1.1
Gateway ARP entry:
10.0.1.1 dev ens5 lladdr 02:e0:e6:ee:3f:5f REACHABLE 

arping result:
ARPING 10.0.1.1 from 10.0.1.85 ens5
Unicast reply from 10.0.1.1 [02:E0:E6:EE:3F:5F]  0.538ms
Sent 1 probes (1 broadcast(s))
Received 1 response(s)

=== HUGEPAGE STATUS ===
AnonHugePages:         0 kB
ShmemHugePages:        0 kB
FileHugePages:     18432 kB
HugePages_Total:    1024
HugePages_Free:     1024
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
Hugetlb:         2097152 kB

=== VFIO STATUS ===
total 0
drwxr-xr-x.  2 root root       80 May 19 06:12 .
drwxr-xr-x. 14 root root     3100 May 19 06:11 ..
crw-------.  1 root root 243,   0 May 19 06:12 noiommu-0
crw-rw-rw-.  1 root root  10, 196 May 19 06:07 vfio

noiommu mode:
Y

=== DPDK SHARED MEMORY ===
no /var/run/dpdk/ directory (clean state)

=== DPDK-RELATED DMESG (last 30 lines) ===
[    0.054367] printk: legacy console [ttyS0] enabled
[    0.055474] x2apic enabled
[    0.060194] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[    0.060308] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format.
[    0.069909] audit: type=2000 audit(1779170854.954:1): state=initialized audit_enabled=0 res=1
[    0.080516] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.131326] ACPI: Interpreter enabled
[    0.131326] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.149145] pci 0000:00:05.0: enabling Extended Tags
[    0.244218] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    0.259781] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[    0.265447] IPI shorthand broadcast: enabled
[    3.922704] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    3.959879] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    4.052979] VFIO - User Level meta-driver version: 0.3
[    4.451002] ena 0000:00:05.0: Elastic Network Adapter (ENA) v2.16.1g
[    4.463336] ena 0000:00:05.0: ENA device version: 0.10
[    4.464085] ena 0000:00:05.0: ENA controller version: 0.0.1 implementation version 1
[    4.565169] ena 0000:00:05.0: ENA Large LLQ is disabled
[    4.577123] ena 0000:00:05.0: Elastic Network Adapter (ENA) found at mem c0500000, mac addr 02:11:32:c7:3f:27
[    4.623826] ena 0000:00:05.0 ens5: renamed from eth0
[  230.137757] pci 0000:00:06.0: enabling Extended Tags
[  230.141888] ena 0000:00:06.0: enabling device (0000 -> 0002)
[  230.154657] ena 0000:00:06.0: ENA device version: 0.10
[  230.155414] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[  230.254631] ena 0000:00:06.0: ENA Large LLQ is disabled
[  230.266472] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:90:b3:ea:df:2d
[  230.274315] ena 0000:00:06.0 ens6: renamed from eth0
[  301.069974] vfio-pci 0000:00:06.0: Adding to iommu group 0
[  301.071407] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device

=== DPDK-RELATED PROCESSES ===
no DPDK processes running

=== END DIAGNOSTICS ===
⚠️ Crash Diagnostics

receiver-dmesg-crashes.log

[    0.069092] pid_max: default: 32768 minimum: 301
[    0.153211] iommu: Default domain type: Translated
[    0.153239] NetLabel:  unlabeled traffic allowed by default
[    0.172574] PCI: CLS 0 bytes, default 64
[    0.237430] nvme nvme0: 2/0/0 default/read/poll queues
[    0.401448] systemd[1]: systemd 252.23-11.amzn2023 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 -BZIP2 -LZ4 +XZ +ZLIB -ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    0.401572] systemd[1]: No hostname configured, using default hostname.
[    0.459808] systemd[1]: Queued start job for default target initrd.target.
[    3.323613] systemd[1]: systemd 252.23-11.amzn2023 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 -BZIP2 -LZ4 +XZ +ZLIB -ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[  346.474800] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:4419)
[  627.581828] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:4902)
[ 1249.375214] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:6069)

sender-dmesg-crashes.log

[    0.069252] pid_max: default: 32768 minimum: 301
[    0.153109] iommu: Default domain type: Translated
[    0.153135] NetLabel:  unlabeled traffic allowed by default
[    0.199964] PCI: CLS 0 bytes, default 64
[    0.280105] nvme nvme0: 2/0/0 default/read/poll queues
[    0.400938] systemd[1]: systemd 252.23-11.amzn2023 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 -BZIP2 -LZ4 +XZ +ZLIB -ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    0.401061] systemd[1]: No hostname configured, using default hostname.
[    0.474331] systemd[1]: Queued start job for default target initrd.target.
[    3.093261] systemd[1]: systemd 252.23-11.amzn2023 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 -BZIP2 -LZ4 +XZ +ZLIB -ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 1066.336552] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:5903)
Kernel Console (dmesg)

receiver-console-output.log (PCI/driver events only)

[  346.473183] vfio-pci 0000:00:06.0: reset done
[  346.474800] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:4419)
[  346.476297] vfio-pci 0000:00:06.0: resetting
[  346.693046] vfio-pci 0000:00:06.0: reset done
[  428.157028] vfio-pci 0000:00:06.0: Removing from iommu group 0
[  429.170287] ena 0000:00:06.0: ENA device version: 0.10
[  429.171061] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[  429.270598] ena 0000:00:06.0: ENA Large LLQ is disabled
[  429.282700] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:1f:31:80:4f:f1
[  429.293665] ena 0000:00:06.0 ens6: renamed from eth0 (while UP)
[  449.034254] vfio-pci 0000:00:06.0: Adding to iommu group 0
[  449.035633] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device
[  627.365505] vfio-pci 0000:00:06.0: resetting
[  627.580233] vfio-pci 0000:00:06.0: reset done
[  627.581828] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:4902)
[  627.583307] vfio-pci 0000:00:06.0: resetting
[  627.800087] vfio-pci 0000:00:06.0: reset done
[  702.376200] vfio-pci 0000:00:06.0: Removing from iommu group 0
[  703.387714] ena 0000:00:06.0: ENA device version: 0.10
[  703.388521] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[  703.487696] ena 0000:00:06.0: ENA Large LLQ is disabled
[  703.499815] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:1f:31:80:4f:f1
[  703.507397] ena 0000:00:06.0 ens6: renamed from eth0
[ 1167.996415] vfio-pci 0000:00:06.0: Adding to iommu group 0
[ 1167.997893] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device
[ 1249.157978] vfio-pci 0000:00:06.0: resetting
[ 1249.373628] vfio-pci 0000:00:06.0: reset done
[ 1249.375214] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:6069)
[ 1249.376647] vfio-pci 0000:00:06.0: resetting
[ 1249.603473] vfio-pci 0000:00:06.0: reset done

sender-console-output.log (PCI/driver events only)

[ 1066.337998] vfio-pci 0000:00:06.0: resetting
[ 1066.554829] vfio-pci 0000:00:06.0: reset done
[ 1129.745871] vfio-pci 0000:00:06.0: Removing from iommu group 0
[ 1130.758769] ena 0000:00:06.0: ENA device version: 0.10
[ 1130.759522] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[ 1130.860686] ena 0000:00:06.0: ENA Large LLQ is disabled
[ 1130.873326] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:90:b3:ea:df:2d
[ 1130.884087] ena 0000:00:06.0 ens6: renamed from eth0 (while UP)
[ 1160.828069] vfio-pci 0000:00:06.0: Adding to iommu group 0
[ 1160.829552] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device
[ 1264.837532] vfio-pci 0000:00:06.0: resetting
[ 1265.054682] vfio-pci 0000:00:06.0: reset done
[ 1265.056273] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (tokio-rt-worker:6347)
[ 1265.057889] vfio-pci 0000:00:06.0: resetting
[ 1265.274561] vfio-pci 0000:00:06.0: reset done
[ 1265.552435] vfio-pci 0000:00:06.0: resetting
[ 1265.764532] vfio-pci 0000:00:06.0: reset done
[ 1265.766113] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (tokio-rt-worker:6367)
[ 1265.767736] vfio-pci 0000:00:06.0: resetting
[ 1265.984513] vfio-pci 0000:00:06.0: reset done
[ 1267.284810] vfio-pci 0000:00:06.0: resetting
[ 1267.514595] vfio-pci 0000:00:06.0: reset done
[ 1267.516192] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (tokio-rt-worker:6390)
[ 1267.517847] vfio-pci 0000:00:06.0: resetting
[ 1267.734528] vfio-pci 0000:00:06.0: reset done
[ 1269.024362] vfio-pci 0000:00:06.0: resetting
[ 1269.254591] vfio-pci 0000:00:06.0: reset done
[ 1269.256180] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (tokio-rt-worker:6413)
[ 1269.257801] vfio-pci 0000:00:06.0: resetting
[ 1269.474556] vfio-pci 0000:00:06.0: reset done

@github-actions

Copy link
Copy Markdown

[Perf] Stage: Deploy

Deploying PerfTestStack...
Configs: plain-rust,rust-dpdk,tokio-dpdk,native-dpdk
Packet sizes: 64,512,1400,8500

@github-actions

Copy link
Copy Markdown

[Perf] Stage: Instances Ready

  • TRex: i-05a0b659619c670ba (10.0.1.55)
  • DUT: i-0b8498717fda027d9 (10.0.1.195)
  • Instance type: unknown

@github-actions

Copy link
Copy Markdown

[Perf] Stage: TRex Config

Starting TRex configuration (MAC discovery + NIC binding)...

@github-actions

Copy link
Copy Markdown

[Perf] Stage: TRex Config OK

  • TX: 0000:00:06.0 MAC: 02:de:2f:ed:b0:59
  • RX: 0000:00:07.0 MAC: 02:83:90:96:4a:97
  • Gateway MAC: 02:4e:08:43:07:85
    Starting TRex server...

@github-actions

Copy link
Copy Markdown

[Perf] Stage: TRex Started

TRex server running. Beginning benchmarks...

@github-actions

Copy link
Copy Markdown

[Perf] DUT Ready

DUT instance i-0b8498717fda027d9 SSM working, build complete.

@github-actions

Copy link
Copy Markdown

[Perf] Stage: Benchmark (1/4)

Running plain-rust benchmark...
Packet sizes: 64,512,1400,8500 | Duration: 30s/step | Target PPS: 70000,140000,350000,700000

@github-actions

Copy link
Copy Markdown

[Perf] Benchmark Diag: plain-rust preflight

TRex API OK: 2 ports
  Port 0: 02:de:2f:ed:b0:59
  Port 1: 02:83:90:96:4a:97
PREFLIGHT_OK

@github-actions

Copy link
Copy Markdown

[Perf] Benchmark Diag: plain-rust result

SSM exit: 0

Output (last 30 lines)
Duration per step: 30s
Source MAC: 02:de:2f:ed:b0:59

--- Packet size: 64B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 69,000 pps, Drop: 1.4286%, Lat avg: 0.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 139,000 pps, Drop: 0.7143%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 348,826 pps, Drop: 0.3354%, Lat avg: 0.0 us
  Target: 700,000 pps ... TX: 700,000 pps, RX: 412,278 pps, Drop: 41.1032%, Lat avg: 3945.0 us

--- Packet size: 512B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 69,000 pps, Drop: 1.4286%, Lat avg: 0.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 139,000 pps, Drop: 0.7143%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 348,921 pps, Drop: 0.3082%, Lat avg: 0.0 us
  Target: 700,000 pps ... TX: 700,000 pps, RX: 505,957 pps, Drop: 27.7205%, Lat avg: 0.0 us

--- Packet size: 1400B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 69,000 pps, Drop: 1.4285%, Lat avg: 202.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 139,000 pps, Drop: 0.7143%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 348,740 pps, Drop: 0.3599%, Lat avg: 303.0 us
  Target: 700,000 pps ... TX: 476,239 pps, RX: 443,797 pps, Drop: 6.8121%, Lat avg: 2670.0 us

--- Packet size: 8500B ---
  (jumbo: capping at 418,133 pps for 30.0 Gbps limit)
  Target: 70,000 pps ... TX: 70,000 pps, RX: 37,639 pps, Drop: 46.2302%, Lat avg: 173.0 us
  Target: 140,000 pps ... TX: 78,287 pps, RX: 75,535 pps, Drop: 3.516%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 78,347 pps, RX: 77,888 pps, Drop: 0.5856%, Lat avg: 0.0 us
  Target: 700,000 pps ... SKIPPED (exceeds 30.0 Gbps cap)

Results written to /tmp/perf-results/plain-rust.json
EXIT_CODE=0

@github-actions

Copy link
Copy Markdown

[Perf] Stage: Benchmark (2/4)

Running rust-dpdk benchmark...
Packet sizes: 64,512,1400,8500 | Duration: 30s/step | Target PPS: 70000,140000,350000,700000

@github-actions

Copy link
Copy Markdown

[Perf] Benchmark Diag: rust-dpdk preflight

TRex API OK: 2 ports
  Port 0: 02:de:2f:ed:b0:59
  Port 1: 02:83:90:96:4a:97
PREFLIGHT_OK

@github-actions

Copy link
Copy Markdown

[Perf] Benchmark Diag: rust-dpdk result

SSM exit: 0

Output (last 30 lines)
Duration per step: 30s
Source MAC: 02:de:2f:ed:b0:59

--- Packet size: 64B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 69,000 pps, Drop: 1.4285%, Lat avg: 251.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 139,000 pps, Drop: 0.7143%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 348,998 pps, Drop: 0.2862%, Lat avg: 265.0 us
  Target: 700,000 pps ... TX: 700,000 pps, RX: 664,149 pps, Drop: 5.1216%, Lat avg: 2121.0 us

--- Packet size: 512B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 69,000 pps, Drop: 1.4285%, Lat avg: 207.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 139,000 pps, Drop: 0.7143%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 349,000 pps, Drop: 0.2857%, Lat avg: 0.0 us
  Target: 700,000 pps ... TX: 700,000 pps, RX: 642,790 pps, Drop: 8.1728%, Lat avg: 0.0 us

--- Packet size: 1400B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 69,000 pps, Drop: 1.4285%, Lat avg: 278.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 139,000 pps, Drop: 0.7143%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 348,997 pps, Drop: 0.2865%, Lat avg: 0.0 us
  Target: 700,000 pps ... TX: 470,362 pps, RX: 454,197 pps, Drop: 3.4368%, Lat avg: 0.0 us

--- Packet size: 8500B ---
  (jumbo: capping at 418,133 pps for 30.0 Gbps limit)
  Target: 70,000 pps ... TX: 70,000 pps, RX: 69,000 pps, Drop: 1.4286%, Lat avg: 547.0 us
  Target: 140,000 pps ... TX: 78,295 pps, RX: 76,091 pps, Drop: 2.8147%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 78,298 pps, RX: 77,850 pps, Drop: 0.572%, Lat avg: 0.0 us
  Target: 700,000 pps ... SKIPPED (exceeds 30.0 Gbps cap)

Results written to /tmp/perf-results/rust-dpdk.json
EXIT_CODE=0

@github-actions

Copy link
Copy Markdown

[Perf] Stage: Benchmark (3/4)

Running tokio-dpdk benchmark...
Packet sizes: 64,512,1400,8500 | Duration: 30s/step | Target PPS: 70000,140000,350000,700000

@github-actions

Copy link
Copy Markdown

[Perf] Benchmark Diag: tokio-dpdk preflight

TRex API OK: 2 ports
  Port 0: 02:de:2f:ed:b0:59
  Port 1: 02:83:90:96:4a:97
PREFLIGHT_OK

@github-actions

Copy link
Copy Markdown

[Perf] Benchmark Diag: tokio-dpdk result

SSM exit: 0

Output (last 30 lines)
Duration per step: 30s
Source MAC: 02:de:2f:ed:b0:59

--- Packet size: 64B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 69,000 pps, Drop: 1.4285%, Lat avg: 0.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 139,000 pps, Drop: 0.7143%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 311,959 pps, Drop: 10.8687%, Lat avg: 0.0 us
  Target: 700,000 pps ... TX: 700,000 pps, RX: 314,723 pps, Drop: 55.0396%, Lat avg: 0.0 us

--- Packet size: 512B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 69,000 pps, Drop: 1.4286%, Lat avg: 0.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 138,999 pps, Drop: 0.7153%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 228,676 pps, Drop: 34.664%, Lat avg: 0.0 us
  Target: 700,000 pps ... TX: 700,000 pps, RX: 228,124 pps, Drop: 67.4109%, Lat avg: 0.0 us

--- Packet size: 1400B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 68,999 pps, Drop: 1.4298%, Lat avg: 0.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 139,000 pps, Drop: 0.7143%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 147,156 pps, Drop: 57.9553%, Lat avg: 0.0 us
  Target: 700,000 pps ... TX: 476,344 pps, RX: 157,345 pps, Drop: 66.9681%, Lat avg: 0.0 us

--- Packet size: 8500B ---
  (jumbo: capping at 418,133 pps for 30.0 Gbps limit)
  Target: 70,000 pps ... TX: 70,000 pps, RX: 54,138 pps, Drop: 22.6604%, Lat avg: 0.0 us
  Target: 140,000 pps ... TX: 78,295 pps, RX: 57,332 pps, Drop: 26.7749%, Lat avg: 0.0 us
  Target: 350,000 pps ... TX: 78,288 pps, RX: 57,682 pps, Drop: 26.3207%, Lat avg: 0.0 us
  Target: 700,000 pps ... SKIPPED (exceeds 30.0 Gbps cap)

Results written to /tmp/perf-results/tokio-dpdk.json
EXIT_CODE=0

@github-actions

Copy link
Copy Markdown

[Perf] Stage: Benchmark (4/4)

Running native-dpdk benchmark...
Packet sizes: 64,512,1400,8500 | Duration: 30s/step | Target PPS: 70000,140000,350000,700000

@github-actions

Copy link
Copy Markdown

[Perf] Benchmark Diag: native-dpdk preflight

TRex API OK: 2 ports
  Port 0: 02:de:2f:ed:b0:59
  Port 1: 02:83:90:96:4a:97
PREFLIGHT_OK

@github-actions

Copy link
Copy Markdown

[Perf] Benchmark Diag: native-dpdk result

SSM exit: 0

Output (last 30 lines)
Duration per step: 30s
Source MAC: 02:de:2f:ed:b0:59

--- Packet size: 64B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 70,000 pps, Drop: 0.0%, Lat avg: 116.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 140,000 pps, Drop: 0.0%, Lat avg: 134.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 349,997 pps, Drop: 0.0009%, Lat avg: 158.0 us
  Target: 700,000 pps ... TX: 700,000 pps, RX: 629,361 pps, Drop: 10.0913%, Lat avg: 957.0 us

--- Packet size: 512B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 70,000 pps, Drop: 0.0%, Lat avg: 120.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 140,000 pps, Drop: 0.0%, Lat avg: 143.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 350,000 pps, Drop: 0.0%, Lat avg: 160.0 us
  Target: 700,000 pps ... TX: 700,000 pps, RX: 623,310 pps, Drop: 10.9557%, Lat avg: 1363.0 us

--- Packet size: 1400B ---
  Target: 70,000 pps ... TX: 70,000 pps, RX: 70,000 pps, Drop: 0.0%, Lat avg: 115.0 us
  Target: 140,000 pps ... TX: 140,000 pps, RX: 140,000 pps, Drop: 0.0%, Lat avg: 144.0 us
  Target: 350,000 pps ... TX: 350,000 pps, RX: 350,000 pps, Drop: 0.0%, Lat avg: 156.0 us
  Target: 700,000 pps ... TX: 476,276 pps, RX: 475,370 pps, Drop: 0.1902%, Lat avg: 2702.0 us

--- Packet size: 8500B ---
  (jumbo: capping at 418,133 pps for 30.0 Gbps limit)
  Target: 70,000 pps ... TX: 70,000 pps, RX: 70,000 pps, Drop: 0.0%, Lat avg: 140.0 us
  Target: 140,000 pps ... TX: 78,336 pps, RX: 75,975 pps, Drop: 3.0145%, Lat avg: 14330.0 us
  Target: 350,000 pps ... TX: 78,298 pps, RX: 77,381 pps, Drop: 1.1711%, Lat avg: 14446.0 us
  Target: 700,000 pps ... SKIPPED (exceeds 30.0 Gbps cap)

Results written to /tmp/perf-results/native-dpdk.json
EXIT_CODE=0

@github-actions

Copy link
Copy Markdown

[Perf] Diag: testpmd log

testpmd output (last 30 lines)
=== testpmd stats (last 30 lines) ===
  ############################################################################
Telling cores to stop...
Waiting for lcores to finish...

  ---------------------- Forward statistics for port 0  ----------------------
  RX-packets: 113483413      RX-dropped: 0             RX-total: 113483413
  RX-error: 403638
  RX-nombufs: 0             
  TX-packets: 113483413      TX-dropped: 0             TX-total: 113483413
  ----------------------------------------------------------------------------

  +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
  RX-packets: 113483413      RX-dropped: 0             RX-total: 113483413
  TX-packets: 113483413      TX-dropped: 0             TX-total: 113483413
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Done.

Stopping port 0...
Stopping ports...
Done

Shutting down port 0...
ena_rx_queue_release(): Rx queue 0:0 released
ena_tx_queue_release(): Tx queue 0:0 released
Closing ports...
Port 0 is closed
Done

Bye...
=== ENA port stats ===
N/A (vfio-pci)

@github-actions

Copy link
Copy Markdown

[Perf] Stage: Results

[07:30:11] INFO Generating markdown summary...

Performance Test Results — unknown

Commit: 26daf4b0
Timestamp: 2026-05-19T07:30:11.136182+00:00

64B packets

Config Target PPS TX pps RX pps Drop % NIC imissed NIC ierrors NIC nombuf App Drops Lat Avg (us) Lat Max (us) TX Mbps RX Mbps
native-dpdk 70,000 70,000 70,000 0.00% — — — — 116.0 463.0 35.8 35.8
native-dpdk 140,000 140,000 140,000 0.00% — — — — 134.0 367.0 71.7 71.7
native-dpdk 350,000 350,000 349,997 0.00% — — — — 158.0 1331.0 179.2 179.2
native-dpdk 700,000 700,000 629,361 10.09% — — — — 957.0 3250.0 358.4 322.2
rust-dpdk 70,000 70,000 69,000 1.43% 0 39,792 0 0 251.0 0.0 35.8 35.3
rust-dpdk 140,000 140,000 139,000 0.71% 0 35,732 0 0 0.0 0.0 71.7 71.2
rust-dpdk 350,000 350,000 348,998 0.29% 0 31,866 0 0 265.0 0.0 179.2 178.7
rust-dpdk 700,000 700,000 664,149 5.12% 0 41,884 0 0 2121.0 0.0 358.4 340.0
tokio-dpdk 70,000 70,000 69,000 1.43% 0 39,214 0 0 0.0 0.0 35.8 38.6
tokio-dpdk 140,000 140,000 139,000 0.71% 0 34,160 0 0 0.0 0.0 71.7 77.8
tokio-dpdk 350,000 350,000 311,959 10.87% 0 24,493 0 0 0.0 0.0 179.2 174.7
tokio-dpdk 700,000 700,000 314,723 55.04% 0 23,932 0 0 0.0 0.0 358.4 176.2
plain-rust 70,000 70,000 69,000 1.43% — — — — 0.0 0.0 35.8 35.3
plain-rust 140,000 140,000 139,000 0.71% — — — — 0.0 0.0 71.7 71.2
plain-rust 350,000 350,000 348,826 0.34% — — — — 0.0 0.0 179.2 178.6
plain-rust 700,000 700,000 412,278 41.10% — — — — 3945.0 0.0 358.4 211.1

512B packets

Config Target PPS TX pps RX pps Drop % NIC imissed NIC ierrors NIC nombuf App Drops Lat Avg (us) Lat Max (us) TX Mbps RX Mbps
native-dpdk 70,000 70,000 70,000 0.00% — — — — 120.0 344.0 286.7 286.7
native-dpdk 140,000 140,000 140,000 0.00% — — — — 143.0 681.0 573.4 573.4
native-dpdk 350,000 350,000 350,000 0.00% — — — — 160.0 859.0 1433.6 1433.6
native-dpdk 700,000 700,000 623,310 10.96% — — — — 1363.0 3907.0 2867.2 2553.1
rust-dpdk 70,000 70,000 69,000 1.43% 0 33,603 0 0 207.0 0.0 286.7 282.6
rust-dpdk 140,000 140,000 139,000 0.71% 0 41,931 0 0 0.0 0.0 573.4 569.3
rust-dpdk 350,000 350,000 349,000 0.29% 0 35,416 0 0 0.0 0.0 1433.6 1429.5
rust-dpdk 700,000 700,000 642,790 8.17% 0 31,898 0 0 0.0 0.0 2867.2 2632.9
tokio-dpdk 70,000 70,000 69,000 1.43% 0 33,003 0 0 0.0 0.0 286.7 285.9
tokio-dpdk 140,000 140,000 138,999 0.72% 0 38,095 0 0 0.0 0.0 573.4 576.0
tokio-dpdk 350,000 350,000 228,676 34.66% 0 20,250 0 0 0.0 0.0 1433.6 947.6
tokio-dpdk 700,000 700,000 228,124 67.41% 0 11,124 0 0 0.0 0.0 2867.2 945.4
plain-rust 70,000 70,000 69,000 1.43% — — — — 0.0 0.0 286.7 282.6
plain-rust 140,000 140,000 139,000 0.71% — — — — 0.0 0.0 573.4 569.3
plain-rust 350,000 350,000 348,921 0.31% — — — — 0.0 0.0 1433.6 1429.2
plain-rust 700,000 700,000 505,957 27.72% — — — — 0.0 0.0 2867.2 2072.4

1400B packets

Config Target PPS TX pps RX pps Drop % NIC imissed NIC ierrors NIC nombuf App Drops Lat Avg (us) Lat Max (us) TX Mbps RX Mbps
native-dpdk 70,000 70,000 70,000 0.00% — — — — 115.0 358.0 784.0 784.0
native-dpdk 140,000 140,000 140,000 0.00% — — — — 144.0 338.0 1568.0 1568.0
native-dpdk 350,000 350,000 350,000 0.00% — — — — 156.0 1094.0 3920.0 3920.0
native-dpdk 700,000 476,276 475,370 0.19% — — — — 2702.0 4283.0 5334.3 5324.1
rust-dpdk 70,000 70,000 69,000 1.43% 0 43,326 0 0 278.0 0.0 784.0 772.8
rust-dpdk 140,000 140,000 139,000 0.71% 0 33,392 0 0 0.0 0.0 1568.0 1556.8
rust-dpdk 350,000 350,000 348,997 0.29% 0 38,535 0 0 0.0 0.0 3920.0 3908.8
rust-dpdk 700,000 470,362 454,197 3.44% 0 25,327 0 0 0.0 0.0 5268.1 5087.0
tokio-dpdk 70,000 70,000 68,999 1.43% 0 38,532 0 0 0.0 0.0 784.0 776.1
tokio-dpdk 140,000 140,000 139,000 0.71% 0 30,635 0 0 0.0 0.0 1568.0 1563.5
tokio-dpdk 350,000 350,000 147,156 57.96% 0 11,865 0 0 0.0 0.0 3920.0 1655.2
tokio-dpdk 700,000 476,344 157,345 66.97% 0 7,118 0 0 0.0 0.0 5335.1 1769.8
plain-rust 70,000 70,000 69,000 1.43% — — — — 202.0 0.0 784.0 772.8
plain-rust 140,000 140,000 139,000 0.71% — — — — 0.0 0.0 1568.0 1556.8
plain-rust 350,000 350,000 348,740 0.36% — — — — 303.0 0.0 3920.0 3905.9
plain-rust 700,000 476,239 443,797 6.81% — — — — 2670.0 0.0 5333.9 4970.5

8500B packets

Config Target PPS TX pps RX pps Drop % NIC imissed NIC ierrors NIC nombuf App Drops Lat Avg (us) Lat Max (us) TX Mbps RX Mbps
native-dpdk 70,000 70,000 70,000 0.00% — — — — 140.0 427.0 4760.0 4760.0
native-dpdk 140,000 78,336 75,975 3.01% — — — — 14330.0 15139.0 5326.9 5166.3
native-dpdk 350,000 78,298 77,381 1.17% — — — — 14446.0 15535.0 5324.3 5261.9
rust-dpdk 70,000 70,000 69,000 1.43% 0 32,165 0 0 547.0 0.0 4760.0 4692.0
rust-dpdk 140,000 78,295 76,091 2.81% 0 22,850 0 0 0.0 0.0 5324.1 5174.2
rust-dpdk 350,000 78,298 77,850 0.57% 0 7,077 0 0 0.0 0.0 5324.3 5293.8
tokio-dpdk 70,000 70,000 54,138 22.66% 0 3,514 0 0 0.0 0.0 4760.0 3684.0
tokio-dpdk 140,000 78,295 57,332 26.77% 0 13,639 0 0 0.0 0.0 5324.1 3901.3
tokio-dpdk 350,000 78,288 57,682 26.32% 0 5,401 0 0 0.0 0.0 5323.6 3925.1
plain-rust 70,000 70,000 37,639 46.23% — — — — 173.0 0.0 4760.0 2559.4
plain-rust 140,000 78,287 75,535 3.52% — — — — 0.0 0.0 5323.5 5136.4
plain-rust 350,000 78,347 77,888 0.59% — — — — 0.0 0.0 5327.6 5296.4

NIC Drops Instrumentation Self-Check

Compares (NIC-FINAL − NIC-BASELINE) one-shot snapshots against the sum of per-tick [PERF] deltas over the reporter's lifetime. These MUST match exactly — a mismatch means per-tick delta bookkeeping is losing data.

Config Status imissed (expected / actual / Δ) ierrors (expected / actual / Δ) rx_nombuf (expected / actual / Δ)
native-dpdk no instrumentation — — —
rust-dpdk OK 0 / 0 / 0 403,335 / 403,335 / 0 0 / 0 / 0
tokio-dpdk OK 0 / 0 / 0 278,435 / 278,435 / 0 0 / 0 / 0
plain-rust no instrumentation — — —

expected = FINAL − BASELINE (raw NIC counter delta across reporter lifetime). actual = sum of per-tick [PERF] delta fields. Any Δ ≠ 0 is a bug in the tick loop's bookkeeping.

plain-rust Kernel NIC Drops (ethtool -S delta)

ethtool snapshots not available — baseline or final file missing in $LOGS_DIR/dut-plain-rust-ethtool-*.txt.

Full results artifact

@gspivey
gspivey merged commit f3ceea1 into development May 19, 2026
5 checks passed
@gspivey
gspivey deleted the agent/ipv6-link-local-scope branch May 19, 2026 07:32
@github-actions

Copy link
Copy Markdown

Synthetic Performance Results (run)

Commit: b574f934

✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)

Synthetic UDP Performance Results

Measures framework overhead: sync dpdk_udp::UdpSocket vs async (std::sync::Mutex + try_recv_from).

Test Payload Sync PPS Async PPS Ratio (sync/async) Async ns/op
TX send_to 64B 12.1M 11.4M 1.1x 88
RX recv_from 64B 3.5M 4.8M 0.7x 210
TX send_to 1400B 1.9M 1.9M 1.0x 530
RX recv_from 1400B 1.1M 1.2M 0.9x 835

Avg sync/async ratio: 0.9x, worst: 1.1x

Good: Async wrapper is within 1.1x of sync — minimal framework overhead.

@github-actions

Copy link
Copy Markdown

Synthetic Performance Results — Graviton (run)

Commit: b574f934

✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)
✅ synthetic UDP socket bound to 10.0.0.1:9000 (MAC: 02:00:00:00:00:01)

Synthetic UDP Performance Results

Measures framework overhead: sync dpdk_udp::UdpSocket vs async (std::sync::Mutex + try_recv_from).

Test Payload Sync PPS Async PPS Ratio (sync/async) Async ns/op
TX send_to 64B 12.1M 11.4M 1.1x 87
RX recv_from 64B 3.6M 4.7M 0.8x 213
TX send_to 1400B 1.9M 1.9M 1.0x 529
RX recv_from 1400B 1.1M 1.2M 0.9x 824

Avg sync/async ratio: 0.9x, worst: 1.1x

Good: Async wrapper is within 1.1x of sync — minimal framework overhead.

@github-actions

Copy link
Copy Markdown

[CI] Stage: Deploy

Infrastructure ready.

  • Sender: i-0ab6104352c884478 (DPDK ENI: 10.0.1.14)
  • Receiver: i-0fe29dd249fb7e09a (DPDK ENI: 10.0.1.75)
  • Both instances SSM-ready.

@github-actions

Copy link
Copy Markdown

[CI] Stage: Deploy

Infrastructure ready.

  • Sender: i-0fd40132f1dfcecf7 (DPDK ENI: 10.0.1.193)
  • Receiver: i-0ca4ab9458fb646eb (DPDK ENI: 10.0.1.89)
  • Both instances SSM-ready.

@github-actions

Copy link
Copy Markdown

[CI] Stage: Summary

All tests PASSED.

ARP seeding: kernel /proc/net/arp (automatic)

  • tier1-dpdk-echo: 6 tests, 0 failures
  • tier2-kernel-interop: 4 tests, 0 failures
  • tier3-iperf-interop: 1 tests, 0 failures
  • tier3-iperf-interop: 1 tests, 0 failures

@github-actions

Copy link
Copy Markdown

✅ Integration Tests Passed — Graviton (run)

Branch: 54/merge | Commit: b574f934

Test Results

  • tier1-dpdk-echo.xml: 6 tests, 0 failures
  • tier2-kernel-interop.xml: 4 tests, 0 failures
  • tier3-iperf-sends.xml: 1 tests, 0 failures
  • tier3-our-app-sends.xml: 1 tests, 0 failures

Application Logs (last 20 lines)

receiver-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.75:9000 (MAC: 02:bc:79:c9:64:73)
echo listening on 10.0.1.75:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.14:9000 (MAC: 02:03:8d:02:95:bf)
echo listening on 10.0.1.14:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-test-client.log

EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
TELEMETRY: No legacy callbacks, legacy socket not created
DPDK bind failed (Port init failed: Invalid port ID: 0), falling back to tokio
Backend: tokio
Sending packets...
Sent 12 bytes: 'arp-probe #1'
Received 12 bytes from 10.0.1.75:9000: 'arp-probe #1'
Test complete
[2026-05-19T07:44:53Z] INFO: ARP resolution succeeded (got response from peer)
[2026-05-19T07:44:53Z] INFO: Test: udp_send_receive
[2026-05-19T07:44:54Z] INFO: UDP send/receive succeeded
[2026-05-19T07:44:54Z] INFO: Test: echo_roundtrip
[2026-05-19T07:44:55Z] INFO: Echo roundtrip succeeded: 5/5 responses received
[2026-05-19T07:44:55Z] INFO: Test: payload_integrity
[2026-05-19T07:44:55Z] INFO: Response received, checking payload match...
[2026-05-19T07:44:55Z] INFO: Payload integrity verified (found in response)
[2026-05-19T07:44:55Z] INFO: JUnit XML written to: /tmp/test-results/tier2-kernel-interop.xml
[2026-05-19T07:44:55Z] INFO: Tier 2 sender tests complete. Results: /tmp/test-results/tier2-kernel-interop.xml

@github-actions

Copy link
Copy Markdown

[CI] Stage: Summary

All tests PASSED.

ARP seeding: kernel /proc/net/arp (automatic)

  • tier1-dpdk-echo: 6 tests, 0 failures
  • tier2-kernel-interop: 4 tests, 0 failures
  • tier3-iperf-interop: 1 tests, 0 failures
  • tier3-iperf-interop: 1 tests, 0 failures

@github-actions

Copy link
Copy Markdown

✅ Integration Tests Passed (Run 26083043342)

Branch: 54/merge | Commit: b574f934

Test Results

  • tier1-dpdk-echo.xml: 6 tests, 0 failures, skipped
  • tier2-kernel-interop.xml: 4 tests, 0 failures, skipped
  • tier3-iperf-sends.xml: 1 tests, 0 failures, skipped
  • tier3-our-app-sends.xml: 1 tests, 0 failures, skipped

Application Logs (last 20 lines)

receiver-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.89:9000 (MAC: 02:78:0f:05:fd:7b)
echo listening on 10.0.1.89:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.193:9000 (MAC: 02:ec:88:58:01:c7)
echo listening on 10.0.1.193:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-test-client.log

EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
TELEMETRY: No legacy callbacks, legacy socket not created
DPDK bind failed (Port init failed: Invalid port ID: 0), falling back to tokio
Backend: tokio
Sending packets...
Sent 12 bytes: 'arp-probe #1'
Received 12 bytes from 10.0.1.89:9000: 'arp-probe #1'
Test complete
[2026-05-19T07:45:56Z] INFO: ARP resolution succeeded (got response from peer)
[2026-05-19T07:45:56Z] INFO: Test: udp_send_receive
[2026-05-19T07:45:57Z] INFO: UDP send/receive succeeded
[2026-05-19T07:45:57Z] INFO: Test: echo_roundtrip
[2026-05-19T07:45:58Z] INFO: Echo roundtrip succeeded: 5/5 responses received
[2026-05-19T07:45:58Z] INFO: Test: payload_integrity
[2026-05-19T07:45:58Z] INFO: Response received, checking payload match...
[2026-05-19T07:45:58Z] INFO: Payload integrity verified (found in response)
[2026-05-19T07:45:58Z] INFO: JUnit XML written to: /tmp/test-results/tier2-kernel-interop.xml
[2026-05-19T07:45:58Z] INFO: Tier 2 sender tests complete. Results: /tmp/test-results/tier2-kernel-interop.xml

receiver-test-client-iperf.log

[2026-05-19T07:52:58Z] INFO: iperf-sends: sent 10 packets, received 10 responses
[2026-05-19T07:52:58Z] INFO: iperf-sends: PASS (sent >= 5 packets)
[2026-05-19T07:52:58Z] INFO: JUnit XML written to: /tmp/test-results/tier3-iperf-sends.xml
[2026-05-19T07:52:58Z] INFO: iperf-sends test complete

sender-test-client-iperf.log

Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #3'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #4'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #4'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #5'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #5'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #6'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #6'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #7'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #7'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #8'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #8'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #9'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #9'
Sent 31 bytes: 'dpdk-to-kernel-test-payload #10'
Received 31 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #10'
Test complete
[2026-05-19T07:51:59Z] INFO: our-app-sends: sent 10 packets, received 10 responses
[2026-05-19T07:51:59Z] INFO: our-app-sends: PASS (sent >= 5 packets)
[2026-05-19T07:51:59Z] INFO: JUnit XML written to: /tmp/test-results/tier3-our-app-sends.xml
[2026-05-19T07:51:59Z] INFO: our-app-sends test complete
Full Application Logs (last 200 lines each)

receiver-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.89:9000 (MAC: 02:78:0f:05:fd:7b)
echo listening on 10.0.1.89:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-echo-server.log

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.193:9000 (MAC: 02:ec:88:58:01:c7)
echo listening on 10.0.1.193:9000 (MTU=9001, max_udp_payload=8973)
Shutting down gracefully...

sender-test-client.log

[2026-05-19T07:41:33Z] INFO: Test: arp_resolution
UDP Test Client
Target: 10.0.1.89:9000
Bind address: 10.0.1.193:0
Message: 'arp-probe'
Count: 1
EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.193:32768 (MAC: 02:ec:88:58:01:c7)
Backend: dpdk
Sending packets...
Sent 12 bytes: 'arp-probe #1'
Received 12 bytes from 10.0.1.89:9000: 'arp-probe #1'
Test complete
[2026-05-19T07:41:34Z] INFO: ARP resolution succeeded (got response from peer)
[2026-05-19T07:41:34Z] INFO: Test: udp_send_receive
[2026-05-19T07:41:36Z] INFO: UDP send/receive succeeded
[2026-05-19T07:41:36Z] INFO: Test: echo_roundtrip
[2026-05-19T07:41:37Z] INFO: Echo roundtrip succeeded: 5/5 responses received
[2026-05-19T07:41:37Z] INFO: Test: payload_integrity
[2026-05-19T07:41:38Z] INFO: Response received, checking payload match...
[2026-05-19T07:41:38Z] INFO: Payload integrity verified (found in response)
[2026-05-19T07:41:38Z] INFO: Test: jumbo_diagnostics
[2026-05-19T07:41:38Z] INFO: === JUMBO FRAME DIAGNOSTICS ===
[2026-05-19T07:41:38Z] INFO: Interface MTU:
  9001
  65536
[2026-05-19T07:41:38Z] INFO:   ens5: MTU=9001
[2026-05-19T07:41:38Z] INFO:   lo: MTU=65536
[2026-05-19T07:41:38Z] INFO: Routing table MTU column:
Iface	Destination	Gateway 	Flags	RefCnt	Use	Metric	Mask		MTU	Window	IRTT                                                       
ens5	00000000	0101000A	0003	0	0	512	00000000	0	0	0                                                                             
ens5	0200000A	0101000A	0007	0	0	512	FFFFFFFF	0	0	0                                                                             
ens5	0001000A	00000000	0001	0	0	512	00FFFFFF	0	0	0                                                                             
ens5	0101000A	00000000	0005	0	0	512	FFFFFFFF	0	0	0                                                                             
[2026-05-19T07:41:38Z] INFO: DPDK port config (from echo server log):
[2026-05-19T07:41:38Z] INFO:   (no MTU info in echo log)
[2026-05-19T07:41:38Z] INFO: === END JUMBO DIAGNOSTICS ===
[2026-05-19T07:41:38Z] INFO: Test: jumbo_echo_8000
[2026-05-19T07:41:40Z] INFO: Jumbo output: UDP Test Client
Target: 10.0.1.89:9000
Bind address: 10.0.1.193:0
Payload size: 8000 bytes
Count: 3
EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.193:32768 (MAC: 02:ec:88:58:01:c7)
Backend: dpdk
Sending packets...
Sent 8000 bytes (binary payload)
Received 8000 bytes from 10.0.1.89:9000 (expected 8000, OK)
Sent 8000 bytes (binary payload)
Received 8000 bytes from 10.0.1.89:9000 (expected 8000, OK)
Sent 8000 bytes (binary payload)
Received 8000 bytes from 10.0.1.89:9000 (expected 8000, OK)
Test complete
[2026-05-19T07:41:40Z] INFO: Jumbo frame echo succeeded: 3/3 responses with correct size
[2026-05-19T07:41:40Z] INFO: JUnit XML written to: /tmp/test-results/tier1-dpdk-echo.xml
[2026-05-19T07:41:40Z] INFO: Tier 1 sender tests complete. Results: /tmp/test-results/tier1-dpdk-echo.xml
[2026-05-19T07:45:56Z] INFO: Test: arp_resolution
UDP Test Client
Target: 10.0.1.89:9000
Bind address: 0.0.0.0:0
Message: 'arp-probe'
Count: 1
EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
TELEMETRY: No legacy callbacks, legacy socket not created
DPDK bind failed (Port init failed: Invalid port ID: 0), falling back to tokio
Backend: tokio
Sending packets...
Sent 12 bytes: 'arp-probe #1'
Received 12 bytes from 10.0.1.89:9000: 'arp-probe #1'
Test complete
[2026-05-19T07:45:56Z] INFO: ARP resolution succeeded (got response from peer)
[2026-05-19T07:45:56Z] INFO: Test: udp_send_receive
[2026-05-19T07:45:57Z] INFO: UDP send/receive succeeded
[2026-05-19T07:45:57Z] INFO: Test: echo_roundtrip
[2026-05-19T07:45:58Z] INFO: Echo roundtrip succeeded: 5/5 responses received
[2026-05-19T07:45:58Z] INFO: Test: payload_integrity
[2026-05-19T07:45:58Z] INFO: Response received, checking payload match...
[2026-05-19T07:45:58Z] INFO: Payload integrity verified (found in response)
[2026-05-19T07:45:58Z] INFO: JUnit XML written to: /tmp/test-results/tier2-kernel-interop.xml
[2026-05-19T07:45:58Z] INFO: Tier 2 sender tests complete. Results: /tmp/test-results/tier2-kernel-interop.xml

receiver-test-client-iperf.log

[2026-05-19T07:52:58Z] INFO: iperf-sends: sent 10 packets, received 10 responses
[2026-05-19T07:52:58Z] INFO: iperf-sends: PASS (sent >= 5 packets)
[2026-05-19T07:52:58Z] INFO: JUnit XML written to: /tmp/test-results/tier3-iperf-sends.xml
[2026-05-19T07:52:58Z] INFO: iperf-sends test complete

sender-test-client-iperf.log

[2026-05-19T07:51:57Z] INFO: Pre-flight: checking DPDK state and ARP cache...
[2026-05-19T07:51:57Z] INFO: Local IP: 10.0.1.193, Peer IP: 10.0.1.89, Port: 9000
[2026-05-19T07:51:57Z] INFO: /proc/net/arp contents:
IP address       HW type     Flags       HW address            Mask     Device
10.0.1.193       0x1         0x2         02:ec:88:58:01:c7     *        ens5
10.0.1.1         0x1         0x2         02:53:9c:ed:3c:f7     *        ens5
10.0.1.116       0x1         0x2         02:d3:a8:15:eb:45     *        ens5
10.0.1.89        0x1         0x2         02:78:0f:05:fd:7b     *        ens5
[2026-05-19T07:51:57Z] INFO: DPDK runtime state:
No /var/run/dpdk/ directory
[2026-05-19T07:51:57Z] INFO: vfio-pci bindings:
0000:00:06.0
bind
module
new_id
remove_id
uevent
unbind
[2026-05-19T07:51:57Z] INFO: Test binary: /opt/dpdk-stdlib/target/release/test-client
-rwxr-xr-x. 2 root root 1893896 May 19 07:39 /opt/dpdk-stdlib/target/release/test-client
[2026-05-19T07:51:57Z] INFO: Launching test-client: /opt/dpdk-stdlib/target/release/test-client --target 10.0.1.89 --port 9000 --bind-ip 10.0.1.193 --count 10 --delay 200
[2026-05-19T07:51:59Z] INFO: Test client output: UDP Test Client
Target: 10.0.1.89:9000
Bind address: 10.0.1.193:0
Message: 'dpdk-to-kernel-test-payload'
Count: 10
EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket -1)
TELEMETRY: No legacy callbacks, legacy socket not created
Warning: Some RX offloads not supported by device (flags: 0x1)
Warning: Some TX offloads not supported by device (flags: 0x1)
✅ DPDK UDP socket bound to 10.0.1.193:32768 (MAC: 02:ec:88:58:01:c7)
Backend: dpdk
Sending packets...
Sent 30 bytes: 'dpdk-to-kernel-test-payload #1'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #1'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #2'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #2'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #3'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #3'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #4'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #4'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #5'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #5'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #6'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #6'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #7'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #7'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #8'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #8'
Sent 30 bytes: 'dpdk-to-kernel-test-payload #9'
Received 30 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #9'
Sent 31 bytes: 'dpdk-to-kernel-test-payload #10'
Received 31 bytes from 10.0.1.89:9000: 'dpdk-to-kernel-test-payload #10'
Test complete
[2026-05-19T07:51:59Z] INFO: our-app-sends: sent 10 packets, received 10 responses
[2026-05-19T07:51:59Z] INFO: our-app-sends: PASS (sent >= 5 packets)
[2026-05-19T07:51:59Z] INFO: JUnit XML written to: /tmp/test-results/tier3-our-app-sends.xml
[2026-05-19T07:51:59Z] INFO: our-app-sends test complete
⚠️ SSM Command Failures (receiver-ssm-failure.log)
=== Polling timeout after 30s ===
Status: InProgress
Instance: i-0ca4ab9458fb646eb (receiver)
Command ID: 6121410e-8aa8-4a04-88a3-1104be419114

=== STDOUT ===


=== STDERR ===


=== Polling timeout after 30s ===
Status: InProgress
Instance: i-0ca4ab9458fb646eb (receiver)
Command ID: 713598f0-2116-4684-9bbc-5de33c92bb70

=== STDOUT ===


=== STDERR ===


=== Polling timeout after 30s ===
Status: InProgress
Instance: i-0ca4ab9458fb646eb (receiver)
Command ID: 2055ceb3-928c-4cf7-9526-8e414c1bd3c3

=== STDOUT ===


=== STDERR ===


=== Polling timeout after 30s ===
Status: InProgress
Instance: i-0ca4ab9458fb646eb (receiver)
Command ID: 395cc091-a4c0-4884-9e4c-64be33c8dbe0

=== STDOUT ===


=== STDERR ===


⚠️ SSM Command Failures (sender-ssm-failure.log)
=== Polling timeout after 30s ===
Status: InProgress
Instance: i-0fd40132f1dfcecf7 (sender)
Command ID: e97ea0b9-1b45-47c3-9278-59cb4e3d57d6

=== STDOUT ===


=== STDERR ===


Network & PCI State

receiver-network-interfaces.log

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: ens5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9001 qdisc mq state UP group default qlen 1000
    link/ether 02:15:e2:4e:92:df brd ff:ff:ff:ff:ff:ff
    altname enp0s5
    altname eni-0ff44264c7b1a17bb
    altname device-number-0.0
    inet 10.0.1.183/24 metric 512 brd 10.0.1.255 scope global dynamic ens5
       valid_lft 2324sec preferred_lft 2324sec
    inet6 fe80::15:e2ff:fe4e:92df/64 scope link proto kernel_ll 
       valid_lft forever preferred_lft forever

sender-network-interfaces.log

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: ens5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9001 qdisc mq state UP group default qlen 1000
    link/ether 02:0e:da:5f:e5:97 brd ff:ff:ff:ff:ff:ff
    altname enp0s5
    altname eni-0adcb6f4036d28176
    altname device-number-0.0
    inet 10.0.1.104/24 metric 512 brd 10.0.1.255 scope global dynamic ens5
       valid_lft 2347sec preferred_lft 2347sec
    inet6 fe80::e:daff:fe5f:e597/64 scope link proto kernel_ll 
       valid_lft forever preferred_lft forever

receiver-networking-diag-baseline.txt

=== NETWORKING DIAGNOSTICS ===
timestamp: 2026-05-19T07:40:54Z
hostname: ip-10-0-1-183.ec2.internal
kernel: 6.18.25-57.109.amzn2023.x86_64

=== DPDK PORT STATUS ===

Network devices using DPDK-compatible driver
============================================
0000:00:06.0 'Elastic Network Adapter (ENA) ec20' drv=vfio-pci unused=ena

Network devices using kernel driver
===================================
0000:00:05.0 'Elastic Network Adapter (ENA) ec20' if=ens5 drv=ena unused=vfio-pci *Active*

No 'Baseband' devices detected
==============================

No 'Crypto' devices detected
============================

No 'DMA' devices detected
=========================

No 'Eventdev' devices detected
==============================

No 'Mempool' devices detected
=============================

No 'Compress' devices detected
==============================

No 'Misc (rawdev)' devices detected
===================================

No 'Regex' devices detected
===========================

=== IP ADDRESSES ===
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: ens5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9001 qdisc mq state UP group default qlen 1000
    link/ether 02:15:e2:4e:92:df brd ff:ff:ff:ff:ff:ff
    altname enp0s5
    altname eni-0ff44264c7b1a17bb
    altname device-number-0.0
    inet 10.0.1.183/24 metric 512 brd 10.0.1.255 scope global dynamic ens5
       valid_lft 3342sec preferred_lft 3342sec
    inet6 fe80::15:e2ff:fe4e:92df/64 scope link proto kernel_ll 
       valid_lft forever preferred_lft forever

=== ARP TABLE ===
10.0.1.99 dev ens5 lladdr 02:a5:d9:c4:da:91 REACHABLE 
10.0.1.1 dev ens5 lladdr 02:53:9c:ed:3c:f7 REACHABLE 
10.0.1.116 dev ens5 lladdr 02:d3:a8:15:eb:45 REACHABLE 
10.0.1.47 dev ens5 lladdr 02:30:ec:c0:85:11 STALE 

=== ROUTE TABLE ===
default via 10.0.1.1 dev ens5 proto dhcp src 10.0.1.183 metric 512 
10.0.0.2 via 10.0.1.1 dev ens5 proto dhcp src 10.0.1.183 metric 512 
10.0.1.0/24 dev ens5 proto kernel scope link src 10.0.1.183 metric 512 
10.0.1.1 dev ens5 proto dhcp scope link src 10.0.1.183 metric 512 

=== IMDS: ENI INFORMATION ===
ENI MACs found: 02:15:e2:4e:92:df/ 02:78:0f:05:fd:7b/ 

--- ENI: 02:15:e2:4e:92:df/ ---
  device-number: 0
  local-ipv4s: 10.0.1.183
  subnet-id: subnet-0655e26b3d274ce92
  subnet-cidr: 10.0.1.0/24

--- ENI: 02:78:0f:05:fd:7b/ ---
  device-number: 1
  local-ipv4s: 10.0.1.89
  subnet-id: subnet-0655e26b3d274ce92
  subnet-cidr: 10.0.1.0/24


=== GATEWAY ARP TEST ===
Gateway IP: 10.0.1.1
Gateway ARP entry:
10.0.1.1 dev ens5 lladdr 02:53:9c:ed:3c:f7 REACHABLE 

arping result:
ARPING 10.0.1.1 from 10.0.1.183 ens5
Unicast reply from 10.0.1.1 [02:53:9C:ED:3C:F7]  0.535ms
Sent 1 probes (1 broadcast(s))
Received 1 response(s)

=== HUGEPAGE STATUS ===
AnonHugePages:         0 kB
ShmemHugePages:        0 kB
FileHugePages:     18432 kB
HugePages_Total:    1024
HugePages_Free:     1024
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
Hugetlb:         2097152 kB

=== VFIO STATUS ===
total 0
drwxr-xr-x.  2 root root       80 May 19 07:40 .
drwxr-xr-x. 14 root root     3100 May 19 07:39 ..
crw-------.  1 root root 243,   0 May 19 07:40 noiommu-0
crw-rw-rw-.  1 root root  10, 196 May 19 07:36 vfio

noiommu mode:
Y

=== DPDK SHARED MEMORY ===
no /var/run/dpdk/ directory (clean state)

=== DPDK-RELATED DMESG (last 30 lines) ===
[    0.054630] printk: legacy console [ttyS0] enabled
[    0.055743] x2apic enabled
[    0.060446] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[    0.060560] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format.
[    0.070154] audit: type=2000 audit(1779176190.803:1): state=initialized audit_enabled=0 res=1
[    0.080962] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.139776] ACPI: Interpreter enabled
[    0.139927] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.147922] pci 0000:00:05.0: enabling Extended Tags
[    0.220771] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    0.225887] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[    0.229525] IPI shorthand broadcast: enabled
[    3.846618] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    3.911225] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    3.983738] VFIO - User Level meta-driver version: 0.3
[    4.409842] ena 0000:00:05.0: Elastic Network Adapter (ENA) v2.16.1g
[    4.422642] ena 0000:00:05.0: ENA device version: 0.10
[    4.423409] ena 0000:00:05.0: ENA controller version: 0.0.1 implementation version 1
[    4.525048] ena 0000:00:05.0: ENA Large LLQ is disabled
[    4.539765] ena 0000:00:05.0: Elastic Network Adapter (ENA) found at mem c0500000, mac addr 02:15:e2:4e:92:df
[    4.576932] ena 0000:00:05.0 ens5: renamed from eth0
[  190.444125] pci 0000:00:06.0: enabling Extended Tags
[  190.448254] ena 0000:00:06.0: enabling device (0000 -> 0002)
[  190.462670] ena 0000:00:06.0: ENA device version: 0.10
[  190.463423] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[  190.564563] ena 0000:00:06.0: ENA Large LLQ is disabled
[  190.577445] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:78:0f:05:fd:7b
[  190.584946] ena 0000:00:06.0 ens6: renamed from eth0
[  251.060767] vfio-pci 0000:00:06.0: Adding to iommu group 0
[  251.062229] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device

=== DPDK-RELATED PROCESSES ===
no DPDK processes running

=== END DIAGNOSTICS ===

sender-networking-diag-baseline.txt

=== NETWORKING DIAGNOSTICS ===
timestamp: 2026-05-19T07:40:47Z
hostname: ip-10-0-1-104.ec2.internal
kernel: 6.18.25-57.109.amzn2023.x86_64

=== DPDK PORT STATUS ===

Network devices using DPDK-compatible driver
============================================
0000:00:06.0 'Elastic Network Adapter (ENA) ec20' drv=vfio-pci unused=ena

Network devices using kernel driver
===================================
0000:00:05.0 'Elastic Network Adapter (ENA) ec20' if=ens5 drv=ena unused=vfio-pci *Active*

No 'Baseband' devices detected
==============================

No 'Crypto' devices detected
============================

No 'DMA' devices detected
=========================

No 'Eventdev' devices detected
==============================

No 'Mempool' devices detected
=============================

No 'Compress' devices detected
==============================

No 'Misc (rawdev)' devices detected
===================================

No 'Regex' devices detected
===========================

=== IP ADDRESSES ===
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: ens5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9001 qdisc mq state UP group default qlen 1000
    link/ether 02:0e:da:5f:e5:97 brd ff:ff:ff:ff:ff:ff
    altname enp0s5
    altname eni-0adcb6f4036d28176
    altname device-number-0.0
    inet 10.0.1.104/24 metric 512 brd 10.0.1.255 scope global dynamic ens5
       valid_lft 3351sec preferred_lft 3351sec
    inet6 fe80::e:daff:fe5f:e597/64 scope link proto kernel_ll 
       valid_lft forever preferred_lft forever

=== ARP TABLE ===
10.0.1.1 dev ens5 lladdr 02:53:9c:ed:3c:f7 REACHABLE 
10.0.1.99 dev ens5 lladdr 02:a5:d9:c4:da:91 REACHABLE 
10.0.1.116 dev ens5 lladdr 02:d3:a8:15:eb:45 REACHABLE 
10.0.1.47 dev ens5 lladdr 02:30:ec:c0:85:11 STALE 

=== ROUTE TABLE ===
default via 10.0.1.1 dev ens5 proto dhcp src 10.0.1.104 metric 512 
10.0.0.2 via 10.0.1.1 dev ens5 proto dhcp src 10.0.1.104 metric 512 
10.0.1.0/24 dev ens5 proto kernel scope link src 10.0.1.104 metric 512 
10.0.1.1 dev ens5 proto dhcp scope link src 10.0.1.104 metric 512 

=== IMDS: ENI INFORMATION ===
ENI MACs found: 02:0e:da:5f:e5:97/ 02:ec:88:58:01:c7/ 

--- ENI: 02:0e:da:5f:e5:97/ ---
  device-number: 0
  local-ipv4s: 10.0.1.104
  subnet-id: subnet-0655e26b3d274ce92
  subnet-cidr: 10.0.1.0/24

--- ENI: 02:ec:88:58:01:c7/ ---
  device-number: 1
  local-ipv4s: 10.0.1.193
  subnet-id: subnet-0655e26b3d274ce92
  subnet-cidr: 10.0.1.0/24


=== GATEWAY ARP TEST ===
Gateway IP: 10.0.1.1
Gateway ARP entry:
10.0.1.1 dev ens5 lladdr 02:53:9c:ed:3c:f7 REACHABLE 

arping result:
ARPING 10.0.1.1 from 10.0.1.104 ens5
Unicast reply from 10.0.1.1 [02:53:9C:ED:3C:F7]  0.533ms
Sent 1 probes (1 broadcast(s))
Received 1 response(s)

=== HUGEPAGE STATUS ===
AnonHugePages:         0 kB
ShmemHugePages:        0 kB
FileHugePages:     18432 kB
HugePages_Total:    1024
HugePages_Free:     1024
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
Hugetlb:         2097152 kB

=== VFIO STATUS ===
total 0
drwxr-xr-x.  2 root root       80 May 19 07:40 .
drwxr-xr-x. 14 root root     3100 May 19 07:40 ..
crw-------.  1 root root 243,   0 May 19 07:40 noiommu-0
crw-rw-rw-.  1 root root  10, 196 May 19 07:36 vfio

noiommu mode:
Y

=== DPDK SHARED MEMORY ===
no /var/run/dpdk/ directory (clean state)

=== DPDK-RELATED DMESG (last 30 lines) ===
[    0.052855] printk: legacy console [ttyS0] enabled
[    0.053954] x2apic enabled
[    0.058615] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[    0.058729] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format.
[    0.068325] audit: type=2000 audit(1779176192.366:1): state=initialized audit_enabled=0 res=1
[    0.078766] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.129331] ACPI: Interpreter enabled
[    0.129331] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.143410] pci 0000:00:05.0: enabling Extended Tags
[    0.224057] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    0.239693] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[    0.242941] IPI shorthand broadcast: enabled
[    3.735416] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    3.777128] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    3.843289] VFIO - User Level meta-driver version: 0.3
[    4.254625] ena 0000:00:05.0: Elastic Network Adapter (ENA) v2.16.1g
[    4.266044] ena 0000:00:05.0: ENA device version: 0.10
[    4.266772] ena 0000:00:05.0: ENA controller version: 0.0.1 implementation version 1
[    4.365055] ena 0000:00:05.0: ENA Large LLQ is disabled
[    4.376920] ena 0000:00:05.0: Elastic Network Adapter (ENA) found at mem c0500000, mac addr 02:0e:da:5f:e5:97
[    4.409590] ena 0000:00:05.0 ens5: renamed from eth0
[  210.308372] pci 0000:00:06.0: enabling Extended Tags
[  210.312492] ena 0000:00:06.0: enabling device (0000 -> 0002)
[  210.322974] ena 0000:00:06.0: ENA device version: 0.10
[  210.323761] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[  210.422946] ena 0000:00:06.0: ENA Large LLQ is disabled
[  210.434751] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:ec:88:58:01:c7
[  210.442107] ena 0000:00:06.0 ens6: renamed from eth0
[  242.866672] vfio-pci 0000:00:06.0: Adding to iommu group 0
[  242.868146] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device

=== DPDK-RELATED PROCESSES ===
no DPDK processes running

=== END DIAGNOSTICS ===
⚠️ Crash Diagnostics

receiver-dmesg-crashes.log

[    0.069503] pid_max: default: 32768 minimum: 301
[    0.157712] iommu: Default domain type: Translated
[    0.163511] NetLabel:  unlabeled traffic allowed by default
[    0.193509] PCI: CLS 0 bytes, default 64
[    0.250943] nvme nvme0: 2/0/0 default/read/poll queues
[    0.421621] systemd[1]: systemd 252.23-11.amzn2023 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 -BZIP2 -LZ4 +XZ +ZLIB -ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    0.421749] systemd[1]: No hostname configured, using default hostname.
[    0.482152] systemd[1]: Queued start job for default target initrd.target.
[    3.133487] systemd[1]: systemd 252.23-11.amzn2023 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 -BZIP2 -LZ4 +XZ +ZLIB -ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[  287.220072] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:4446)
[  550.168112] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:4981)
[ 1147.233645] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:6200)

sender-dmesg-crashes.log

[    0.067693] pid_max: default: 32768 minimum: 301
[    0.147291] iommu: Default domain type: Translated
[    0.148408] NetLabel:  unlabeled traffic allowed by default
[    0.185734] PCI: CLS 0 bytes, default 64
[    0.256199] nvme nvme0: 2/0/0 default/read/poll queues
[    0.391763] systemd[1]: systemd 252.23-11.amzn2023 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 -BZIP2 -LZ4 +XZ +ZLIB -ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    0.391886] systemd[1]: No hostname configured, using default hostname.
[    0.461236] systemd[1]: Queued start job for default target initrd.target.
[    2.915140] systemd[1]: systemd 252.23-11.amzn2023 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 -BZIP2 -LZ4 +XZ +ZLIB -ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[  968.608447] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:5620)
Kernel Console (dmesg)

receiver-console-output.log (PCI/driver events only)

[  287.218473] vfio-pci 0000:00:06.0: reset done
[  287.220072] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:4446)
[  287.221529] vfio-pci 0000:00:06.0: resetting
[  287.438323] vfio-pci 0000:00:06.0: reset done
[  366.388847] vfio-pci 0000:00:06.0: Removing from iommu group 0
[  367.402084] ena 0000:00:06.0: ENA device version: 0.10
[  367.402837] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[  367.504010] ena 0000:00:06.0: ENA Large LLQ is disabled
[  367.516903] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:78:0f:05:fd:7b
[  367.527603] ena 0000:00:06.0 ens6: renamed from eth0 (while UP)
[  387.079807] vfio-pci 0000:00:06.0: Adding to iommu group 0
[  387.081223] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device
[  549.932810] vfio-pci 0000:00:06.0: resetting
[  550.166520] vfio-pci 0000:00:06.0: reset done
[  550.168112] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:4981)
[  550.169578] vfio-pci 0000:00:06.0: resetting
[  550.386374] vfio-pci 0000:00:06.0: reset done
[  623.401440] vfio-pci 0000:00:06.0: Removing from iommu group 0
[  624.414262] ena 0000:00:06.0: ENA device version: 0.10
[  624.415013] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[  624.514251] ena 0000:00:06.0: ENA Large LLQ is disabled
[  624.526321] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:78:0f:05:fd:7b
[  624.534850] ena 0000:00:06.0 ens6: renamed from eth0
[ 1068.495922] vfio-pci 0000:00:06.0: Adding to iommu group 0
[ 1068.497388] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device
[ 1147.004947] vfio-pci 0000:00:06.0: resetting
[ 1147.232045] vfio-pci 0000:00:06.0: reset done
[ 1147.233645] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (echo:6200)
[ 1147.235091] vfio-pci 0000:00:06.0: resetting
[ 1147.451926] vfio-pci 0000:00:06.0: reset done

sender-console-output.log (PCI/driver events only)

[  968.609937] vfio-pci 0000:00:06.0: resetting
[  968.826696] vfio-pci 0000:00:06.0: reset done
[ 1030.109921] vfio-pci 0000:00:06.0: Removing from iommu group 0
[ 1031.122890] ena 0000:00:06.0: ENA device version: 0.10
[ 1031.123675] ena 0000:00:06.0: ENA controller version: 0.0.1 implementation version 1
[ 1031.224588] ena 0000:00:06.0: ENA Large LLQ is disabled
[ 1031.236369] ena 0000:00:06.0: Elastic Network Adapter (ENA) found at mem c0508000, mac addr 02:ec:88:58:01:c7
[ 1031.246756] ena 0000:00:06.0 ens6: renamed from eth0 (while UP)
[ 1060.367866] vfio-pci 0000:00:06.0: Adding to iommu group 0
[ 1060.369270] vfio-pci 0000:00:06.0: Adding kernel taint for vfio-noiommu group on device
[ 1161.278826] vfio-pci 0000:00:06.0: resetting
[ 1161.504889] vfio-pci 0000:00:06.0: reset done
[ 1161.506512] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (tokio-rt-worker:6065)
[ 1161.508142] vfio-pci 0000:00:06.0: resetting
[ 1161.724733] vfio-pci 0000:00:06.0: reset done
[ 1162.021973] vfio-pci 0000:00:06.0: resetting
[ 1162.244747] vfio-pci 0000:00:06.0: reset done
[ 1162.246362] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (tokio-rt-worker:6085)
[ 1162.248020] vfio-pci 0000:00:06.0: resetting
[ 1162.464695] vfio-pci 0000:00:06.0: reset done
[ 1163.754149] vfio-pci 0000:00:06.0: resetting
[ 1163.974753] vfio-pci 0000:00:06.0: reset done
[ 1163.976362] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (tokio-rt-worker:6108)
[ 1163.978042] vfio-pci 0000:00:06.0: resetting
[ 1164.194686] vfio-pci 0000:00:06.0: reset done
[ 1165.484186] vfio-pci 0000:00:06.0: resetting
[ 1165.704743] vfio-pci 0000:00:06.0: reset done
[ 1165.706349] vfio-pci 0000:00:06.0: vfio-noiommu device opened by user (tokio-rt-worker:6131)
[ 1165.708040] vfio-pci 0000:00:06.0: resetting
[ 1165.924654] vfio-pci 0000:00:06.0: reset done

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant