New spec for Sonnenkraft SKSC3 - first test

[alfadir]

The Specfile is tested with RESOL-LAN adapter and a Sonnenkraft SKSC3.

This was the test output of a cold 1000l buffer, as we are doing some changes to the heating system.
{"Sonnekraft SKSC3 [Regler]": {"Temperatur Sensor 1": "15.9 °C", "Temperatur Sensor 2": "29.3 °C", "Temperatur Sensor 3": "35.4 °C", "Temperatur Sensor 4": "31.0 °C", "Temperatur Sensor 5": "32.2 °C", "Temperatur Sensor 6": "36.7 °C", "Temperatur Sensor 7": "-1.2 °C", "Temperatur Sensor 8": "-0.7 °C", "Irradation": "0 W/m2", "Volumenstrom Sensor": "0 l/h", "Pump speed 1": "0 %", "Pump speed 2": "0 %", "Pump speed 3": "0 %", "Pump speed A": "0 %", "Heat": "713 Wh", "Error mask": "0 ", "Sensor line break number": "0 #", "Sensor short-circuit number": "0 #", "System time": "2661 s"}}

The Heat, Systemtime does not seem to work, but Temp sensors work.

Sonnenkraft-SKSC3.json
is the specfile used and I had to do some adjustment to the resol.py file to make it work

--- a/resol.py
+++ b/resol.py
@@ -161,7 +161,7 @@ def parse_payload(msg):
                 packet['command'].lower() == get_command(msg).lower():
             result[get_source_name(msg)] = {}
             for field in packet['field']:
-                result[get_source_name(msg)][field['name']] = \
+                result[get_source_name(msg)][field['name'][0]] = \
                     str(
                         gb(payload, field['offset'], int(field['offset'])+((int(field['bitSize'])+1) / 8)) *
                         (Decimal(field['factor']) if 'factor' in field else 1)

If there is suggestion to improvment I can test it on the system here.