I am trying to build a ir transmitter using this library.
My plan is to add upto 1000 ir commands but when i tried to use 256 or more from the group object it frozen the code.
for (uint8_t channel = 0; channel < 254; channel++)
{
knx.getGroupObject(channel + 1).callback(Ir_callback);
}
for (uint8_t channel = 0; channel < 254; channel++)
{
knx.getGroupObject(channel + 1).dataPointType(DPT_Trigger);
}
it worked until this point when i am trying to access the 256th object it frozen.
do you have any idea ?.
while looking into the knx specification System B 07B0 supports up to 65536 group objects.
i am using a rp2040 based board with 16MB flash.
-DKNX_UART_RX_PIN=17
-DKNX_UART_TX_PIN=16
-DMASK_VERSION=0x07B0
; -DKNX_FLASH_SIZE=16384
-DKNX_FLASH_OFFSET=0xE00000 ;Place at 14MB offset
-DKNX_FLASH_SIZE=0x100000 ;1MB for KNX data
-D PIO_FRAMEWORK_ARDUINO_ENABLE_RTTI
-DKNX_BUTTON=19
-DKNX_LED=18
-DKNX_LED_ACTIVE_ON=1
I am trying to build a ir transmitter using this library.
My plan is to add upto 1000 ir commands but when i tried to use 256 or more from the group object it frozen the code.
it worked until this point when i am trying to access the 256th object it frozen.
do you have any idea ?.
while looking into the knx specification System B 07B0 supports up to 65536 group objects.
i am using a rp2040 based board with 16MB flash.